Roland SH-32 Bedienungsanleitung PDF herunterladen (Seite 72)

Chapter 5. Using in Performance Mode

Layering Patches for a Thicker

Sound (Part Stack Function)

By pressing more than one Part button at the same time in

Performance mode, causing those buttons to light up, you can have

all the Patches assigned to those Parts play simultaneously. This

function is called the Part Stack function. Use this feature to

achieve fat, complex sounds simply and easily.

With the SH-32’s Part Stack function, merely stacking

(simultaneously pressing multiple Part buttons) allows you to

have all these Parts act as if they were all set to the same

MIDI channel. Regardless of the individual channel settings in

each of the Parts used in a stack, messages are received only via

the MIDI channel for the Part with the lowest Part number.

1. Confirm that the SH-32 is in Performance mode.

2. Assign the Patches you want to have played to their

respective Parts (p. 71).

3. Simultaneously press the buttons ([1]–[4/R]) for any Parts

you want to have played together.

• You can stack up to a maximum of four Parts.

• Stacked Parts need not be adjacent; for example, you can stack

Part 1 and Part 3.

• You cannot set two Part stacks at the same time.

• The status of Part Stack can be saved together with the

Performance settings, using the write procedure.

• To exit Part Stack, press any of the stack’s Part buttons twice.

• Buttons for stacked Parts light/blink at the same time. If at this

time only one of the buttons (one Part) is blinking, it indicates

that part is being edited with the panel controls. When another

button in the stack is pressed, that button blinks, and the

corresponding Part becomes the one being edited. You cannot

edit more than one Part at the same time.

• If any part in the stack is included in the Parts used by

Arpeggiator (p. 80) or the Chord Memory function (p. 82), then

the relevant function acts upon all of the parts in the stack.

Editing a Performance

You can change these settings for the Patch or Rhythm Set assigned

to each Part even in Performance mode. You can save changes to the

settings to each Patch or Rhythm Set.

However, the parameters described in the following section,

“Settings Affecting the Overall Performance,” are set for the

Performance itself and can be saved to each Performance.

Settings Affecting the Overall

Performance

Here’s how to make the common settings applied to all of the Parts

in the Performance.

1. Select the Performance with the settings you want to

change.

2. You can set the parameters shown in the following figure.

Use the buttons indicated for each parameter to make the

settings. In addition, some parameters include values that

are set by pressing [VALUE ▼/▲].

fig.05-02.e

For more detailed information on each of the parameters, see the

explanations on the reference pages for each parameter.

3. To save the settings, press [WRITE] and carry out the write

procedure (p. 73).

Performance

Level

→ p. 59

[INS-FX]: Insertion Effects On/Off → p. 64

[REV/DELAY]: Reverb/Delay On/Off → p. 65

Arpeggiator Settings

[ON] → p. 74

[STYLE] → p. 74

[GRID] → p. 75

[DURATION] → p. 76

[RANGE] → p. 76

[MOTIF] → p. 76

[BPM] → p. 74

Switch the effect

connection

(series/parallel)

→ p. 64

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 123 124

Kommentare zu diesen Handbüchern

Keine Kommentare

Roland SH-32 Bedienungsanleitung Seite 72

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Die Eingabegeräte Roland SH-32