Roland SH-32 Bedienungsanleitung PDF herunterladen (Seite 76)

Chapter 6. Using Arpeggiator (ARPEGGIATOR)

Applying Staccato and Tenuto

(DURATION)

This setting (duration) determines whether the sounds are played

staccato (short and clipped), or tenuto (fully drawn out).

This setting has no effect with Rhythm Styles.

1. Press [GRID], causing the indicator to blink.

fig.06-05

2. Press [VALUE ▼/▲] to set the duration.

Settings values: 30, 40, 50, 60, 70, 80, 90, 100, 120, FUL, Ft1, Ft2

For example, when set to “30,” the length of the note in a grid (or

when a series of grids is connected with ties, the final grid) is

30% of the full length of the note set in the grid type.

FUL (Full): Even if the linked grid is not connected with a tie, the

same note continues to sound until the point at which the next

new sound is specified.

Ft1 (Filter 1): Just as with regular arpeggios, the varying

combinations of note numbers are played according to the keys

pressed during the performance; these are then substituted with

the controls relative to the filter cutoff frequency. The patterns of

the filter switching on and off changes according to how the keys

are pressed.

Ft2 (Filter 2): The note numbers originally played when the

Arpeggio Style was created are produced, regardless of the keys

pressed during performance; then these are the controls relative

to the filter cutoff frequency. This yields a fixed pattern where

the changes occur in steps, similar to a step modulator.

With both “Ft1” (Filter 1) and “Ft2” (Filter 2), the note number

designating the sound to be produced by Arpeggiator is

replaced with the controls relative to the filter cutoff frequency.

This provides a filter effect that changes the sound to a scale that

progresses according to the rhythm.

Changing the Range of the

Arpeggio (RANGE)

This adds an effect that shifts arpeggios one cycle at a time in octave

units (octave range). You can set the shift range upwards or

downwards (up to three octaves up or down).

This setting has no effect with Rhythm Styles.

1. Press [RANGE], causing the indicator to light.

fig.06-06

2. Press [VALUE ▼/▲] to set the octave range.

Settings value: -3–0–3

Selecting Ascending/Descending

Variations (Different Ways of

Playing the Sounds) (MOTIF)

This selects the method used to play sounds (motif) when you have a

greater number of notes than programmed for the Arpeggio Style.

When the number of keys played is less than the number of

notes in the Style, the highest-pitched of the pressed keys is

played by default.

This setting has no effect with Rhythm Styles.

1. Press [RANGE], causing the indicator to blink.

fig.06-06

2. Press [VALUE ▼/▲] to select one of the following motifs.

UP.L: Only the lowest of the keys pressed is sounded each time,

and the notes play in order from the lowest of the pressed keys.

UP.H: Notes from both the lowest and highest pressed keys are

sounded each time, and the notes play in order from the lowest

of the pressed keys.

UP._: The notes play in order from the lowest of the pressed

keys. No one note is played every time.

dn.L: Only the lowest of the keys pressed is sounded each time,

and the notes play in order from the highest of the pressed keys.

dn.H: Notes from both the lowest and highest pressed keys are

sounded each time, and the notes play in order from the highest

of the pressed keys.

dn._: The notes play in order from the highest of the pressed

keys. No note is played every time.

Ud.L: Only the lowest of the keys pressed is sounded each time,

and the notes in the arpeggio are played in order from the lowest

of the pressed keys and then back again in the reverse order.

Ud.H: Notes from both the lowest and highest pressed keys are

sounded each time, and the notes play in order from the lowest

of the pressed keys and then back again in the reverse order.

Ud._: The notes play in order from the lowest of the pressed

keys, and then back again in the reverse order. No note is played

every time.

rn.L: While only the lowest of the keys pressed is sounded each

time, the notes in the arpeggio are played in random order.

Action of a Style starting from the lowest note, “1-2-3-2” when the

keys “C-D-E-F-G” are played

When “UP.L” is selected as the motif:

C-D-E-D → C-E-F-E → C-F-G-F (→ repeated)

When “UP._” is selected as the motif:

C-D-E-D → D-E-F-E → E-F-G-F (→ repeated)

When “Ud.H” is selected as the motif:

C-D-G-D → C-E-G-E → C-F-G-F → C-E-G-E (→ repeated)

1 2 ... 71 72 73 74 75 76 77 78 79 80 81 ... 123 124

Kommentare zu diesen Handbüchern

Keine Kommentare

Roland SH-32 Bedienungsanleitung Seite 76

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Die Eingabegeräte Roland SH-32