Roland SH-32 Bedienungsanleitung PDF herunterladen (Seite 88)

Chapter 8. Using the SH-32 with External MIDI Devices

When Switching Patches

The MIDI messages transmitted by the external MIDI device will be

received by the SH-32 to select Patches as shown in the following

table.

When Switching Rhythm Sets

The MIDI messages transmitted by the external MIDI device will be

received by the SH-32 to select Rhythm Sets as shown in the

following table.

When Switching Performances

The MIDI messages transmitted by the external MIDI device will be

received by the SH-32 to select Performances as shown in the

following table.

Synchronizing Arpeggiator

and the LFO to an External

MIDI Device

You can synchronize the Arpeggiator performance tempo and the

LFO modulation cycle to an external MIDI device’s tempo (clock).

1. Use a MIDI cable to connect the SH-32’s MIDI IN connector to

the MIDI OUT connector on the external MIDI device.

2. Set the System function’s CLOCK to “ ” (MIDI) (p. 92).

3. When synchronizing the LFO modulation rate, press [BPM

SYNC], causing the indicator to light.

4. Transmit the MIDI clock from the external MIDI device. For

instructions on how to do this, refer to the owner’s manual

for the external MIDI device.

This synchronizes the Arpeggiator performance tempo or LFO

modulation cycle to the external MIDI device’s tempo.

Saving SH-32 Settings on an

External Sequencer

(BULK DUMP)

With the SH-32, you can transmit various settings to an external

device in the form of exclusive messages. This is referred to as Bulk

Dump. Thus, you can save the SH-32’s settings by connecting an

external sequencer or other device and transmitting the data to the

sequencer. Alternatively, instead of an external sequencer, by

connecting another SH-32 and transmitting the data to it, you can set

two SH-32s simultaneously.

1. Use a MIDI cable to connect the SH-32’s MIDI OUT connector

to the MIDI IN connector of the external sequencer.

2. Turn the FX/SYSTEM knob to “SYSTEM.”

fig.05-01.e

Bank Number Bank Select Program

Change Number

MSB LSB

A (User) 11–18 87 0 1–8

21–28 87 0 9–16

31–38 87 0 17–24

41–48 87 0 25–32

51–58 87 0 33–40

61–68 87 0 41–48

71–78 87 0 49–56

81–88 87 0 57–64

B (User) 11–18 87 0 65–72

21–28 87 0 73–80

31–38 87 0 81–88

41–48 87 0 89–96

51–58 87 0 97–104

61–68 87 0 105–112

71–78 87 0 113–120

81–88 87 0 121–128

C (Preset) 11–18 87 64 1–8

21–28 87 64 9–16

31–38 87 64 17–24

41–48 87 64 25–32

51–58 87 64 33–40

61–68 87 64 41–48

71–78 87 64 49–56

81–88 87 64 57–64

D (Preset) 11–18 87 64 65–72

21–28 87 64 73–80

31–38 87 64 81–88

41–48 87 64 89–96

51–58 87 64 97–104

61–68 87 64 105–112

71–78 87 64 113–120

81–88 87 64 121–128

Bank Number Bank Select Program

Change Number

MSB LSB

(User) r1U 86 0 1

r2U 86 0 2

(Preset) r3P 86 64 1

r4P 86 64 2

Bank Number Bank Select Program

Change Number

MSB LSB

(User) 1-1–1-8 85 0 1–8

2-1–2-8 85 0 9–16

3-1–3-8 85 0 17–24

4-1–4-8 85 0 25–32

5-1–5-8 85 0 33–40

6-1–6-8 85 0 41–48

7-1–7-8 85 0 49–56

8-1–8-8 85 0 57–64

blinking

1 2 ... 83 84 85 86 87 88 89 90 91 92 93 ... 123 124

Kommentare zu diesen Handbüchern

Keine Kommentare

Roland SH-32 Bedienungsanleitung Seite 88

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Die Eingabegeräte Roland SH-32