Roland SH-32 Bedienungsanleitung PDF herunterladen (Seite 65)

Chapter 3. Applying Effects to the Sound (INS-FX, REV/DELAY)

Chapter 3

Setting the Insertion Effects

You can set a variety of parameters in each Patch or Rhythm Set for

the Insertion Effects selected with the effect type.

Using the INTENSITY Knob

Assigned to the INS-FX [INTENSITY] knob is the specific parameter

that is best suited for adjustment with the knob. The parameter

assigned is predetermined for the selected effect type.

fig.03-07a

Rotate [INTENSITY] while [INS-FX] is lit to change the amount of

the effect applied.

The functions of parameters that may be set differs according to

the effect selected with the effect type. For more details, refer to

“Insertion Effects Parameters” (p. 107).

After adjusting the effect with [INTENSITY], the knob’s settings are

saved when you press [WRITE] and carry out the write procedure.

Using the FX/SYSTEM Knob and

[VALUE ▼/▲]

1. Confirm that the SH-32 is in Patch mode.

2. Turn the FX/SYSTEM knob to the parameter to be set; select

“COLOR,” “RATE (DEPTH),” or “LEVEL.”

fig.03-08

The functions of parameters that may be set differs according to

the effect selected with the effect type. For more details, refer to

“Insertion Effects Parameters” (p. 107).

3. Press [VALUE ▼/▲] to select a value.

You can make settings for the selected parameter only when the

indicator to the left of the FX/SYSTEM knob is blinking.

4. When you finish making settings, press [EXIT] to end the

procedure.

5. To save the settings, press [WRITE] and carry out the write

procedure (p. 63, p. 70).

Using the Reverb/Delay

(REV/DELAY)

This section explains the procedures used when working with

Reverb/Delay.

Turning the Reverb/Delay On and

Off

You can set whether Reverb/Delay are used (switched on), or not

used (switched off) in each Patch, Rhythm Set, or Performance. Turn

these settings OFF when you wish to listen to the unprocessed sound

as you create a sound, or when you wish to use external effects

processors instead of the built-in effects.

In Part Assign mode (p. 71), the following procedure switches

each Part on and off, and the Reverb/Delay for the selected parts

is switched on or off. In addition, you can turn the individual

Rhythm Tones (percussion instruments) in Rhythm Tone Edit (p.

69) on and off.

1. Press [REV/DELAY], to switch the effect on or off.

The effect is on when the indicator is lit, and off when the

indicator light is off.

fig.03-03

2. To save the settings, press [WRITE] and carry out the write

procedure (p. 63, p. 70, p. 73).

Selecting the Reverb/Delay Type

(TYPE)

The SH-32 features 10 different types of internal Reverb/Delay

effects; you can select the effect type for each individual Patch or

Rhythm Set.

1. Confirm that the SH-32 is in Patch mode.

2. Rotate the FX/SYSTEM knob to “TYPE” in the “REV/DELAY”

section.

fig.03-04.e

3. Press [VALUE ▼/▲] to select which of the effects you want

to use.

For details on the Reverb/Delay, refer to “Reverb/Delay

Parameters” (p. 113).

4. When you finish making settings, press [EXIT] to end the

procedure.

5. To save the settings, press [WRITE] and carry out the write

procedure (p. 63, p. 70).

blinking

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 123 124

Kommentare zu diesen Handbüchern

Keine Kommentare

Roland SH-32 Bedienungsanleitung Seite 65

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Die Eingabegeräte Roland SH-32