Roland SH-32 Bedienungsanleitung PDF herunterladen (Seite 60)

Chapter 2. Creating Your Own Sounds

[FORM]

Select the output waveform for LFO. The sound will be modulated

in the same shape as the selected LFO waveform.

The waveforms depicted on the SH-32’s panel are merely images

used for reference. While the actual waveforms that are output

may resemble these images, they are not identical.

Adjusting the Rate of Modulation

(RATE)

[RATE]

This adjusts the rate of the LFO’s modulation. As the knob is rotated

toward the right, the modulation will become faster.

fig.02-37

You can synchronize the LFO rate to Arpeggiator or an external

MIDI device’s tempo (clock). For more detailed information,

refer to “Synchronizing the Modulation to the Song Tempo

(BPM SYNC, BEAT/CYCLE)” (p. 61).

Adjusting the Modulation Depth

(DESTINATION, DEPTH)

[DESTINATION]

Selects the waveform for which the modulation is to be set with

[DEPTH].

[DEPTH]

Sets the amount of LFO that is applied (depth of modulation). The

effect will increase as the knob is rotated further toward the right of

center. Turning this to the left of center (counterclockwise) changes

the direction of the waveform. At the center position, the LFO has no

effect on the sound. Use [DESTINATION] to select the waveform to

which the LFO is applied.

Waveform Description

(Triangle Wave)

The sound will be modulated

continuously. This is suitable

when you want to obtain a vibra-

to effect.

(Sine Wave)

The sound will be modulated

continuously. This is suitable in

situations where, for example,

you want to obtain a smoother

sound.

(Sawtooth Wave)

Upon reaching the crest of the

wave, the wave returns to the

starting position, where it starts

to rise again. Turning [DEPTH]

to the left of center (counterclock-

wise) changes the phase of the

waveform (once the trough of the

wave is reached, the wave re-

turns to the starting position,

where it starts to fall again).

(Square Wave)

The sound will be modulated as

if it were being switched between

two positions.

(Trapezoidal Wave)

The sound will be modulated as

if it were being switched between

two positions. The sound pro-

duced is relatively smoother than

that of the square wave.

(Sample & Hold Wave)

The sound is modulated as if it

were being switched randomly.

RND (Random Wave) The sound is modulated as if it

were being switched randomly.

The sound produced is relatively

smoother than that of the sample

and hold wave.

Destination Description

OSC 1 Sets the LFO depth applied to the

OSC 1 pitch, resulting in a vibrato

effect.

OSC 2 Sets the LFO depth applied to the

OSC 2 pitch, resulting in a vibrato

effect.

FILTER Sets the LFO depth applied to the

filter (brightness), resulting in a

wah effect.

AMP Sets the LFO depth applied to the

amplifier (volume), resulting in a

tremolo effect.

PAN Sets the LFO depth applied to the

pan, resulting in a Particular ef-

fect in which the sound image

moves cyclically.

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 123 124

Kommentare zu diesen Handbüchern

Keine Kommentare

Roland SH-32 Bedienungsanleitung Seite 60

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Die Eingabegeräte Roland SH-32