Roland VS-1824 Bedienungshandbuch PDF herunterladen (Seite 88)

Chapter 6 Mixer Channel Strip Detail

[F1 (FX1In)] Effect 1 Insert

After pressing [F1 (FX1In)], or moving the cursor to the

FXIns area, press [ENTER] (see “Effect Types,” p. 99).

FX1 (Effect Insert Switch)

This sets how the effect is connected in the mixer.

Off:

The effect is not inserted in the channel.

Ins:

Both channels of the stereo effect are inserted into the

channel.

InsL:

The left channel of the effect is inserted into the mixer

channel.

InsR:

The right channel of the effect is inserted into the mixer

channel.

InsS:

Each channel of the effect is inserted in series into the

mixer channel. In other words, it is sent through one side

of a stereo effect before it passes through the other side

of the effect.

* When Ins or InsS is selected, that effect cannot be inserted on

any other channel. When InsL or InsR is selected, that effect

can be inserted only on one other mixer channel. If the name of

an input or track appears as the Insert Switch setting, the

effect is already being inserted in the displayed input or track.

You will need to select the input or track that is using that

effect and turn its Effect Insert Switch off. Remember that

effects can be inserted in the MIX bus as well (p. 105)

Snd (Insert Send Level)

This adjusts the level of signal (-42 dB to +6 dB) sent to the

effect. The default setting is 0 dB.

Rtn (Insert Return Level)

This adjusts the level of signal (-42 dB to +6 dB) returned

from the effect. The default setting is 0 dB.

[F2 (FX2In)] Effect 2 Insert

After pressing [F2 (FX2In)], or moving the cursor to the

FXIns area, press [ENTER].

FX2 (Effect Insert Switch)

This sets how the effect is connected in the mixer.

Off:

The effect is not inserted in the channel.

Ins:

Both channels of the stereo effect are inserted into the

channel.

InsL:

The left channel of the effect is inserted into the mixer

channel.

InsR:

The right channel of the effect is inserted into the mixer

channel.

InsS:

Each channel of the effect is inserted in series into the

mixer channel. In other words, it is sent through one side

of a stereo effect before it passes through the other side

of the effect.

* When Ins or InsS is selected, that effect cannot be inserted on

any other channel. When InsL or InsR is selected, that effect

can be inserted only on one other mixer channel. If the name of

an input or track appears as the Insert Switch setting, the

effect is already being inserted in the displayed input or track.

You will need to select the input or track that is using that

effect and turn its Effect Insert Switch off. Remember that

effects can be inserted in the MIX bus as well (p. 105).

Snd (Insert Send Level)

This adjusts the level of signal (-42 dB to +6 dB) sent to the

effect. The default setting is 0 dB.

Rtn (Insert Return Level)

This adjusts the level of signal (-42 dB to +6 dB) returned

from the effect. The default setting is 0 dB.

1 2 ... 83 84 85 86 87 88 89 90 91 92 93 ... 294 295

Kommentare zu diesen Handbüchern

Keine Kommentare

Roland VS-1824 Bedienungshandbuch Seite 88

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Musikinstrumente Roland VS-1824