Roland VS-1824 Bedienungshandbuch PDF herunterladen (Seite 229)

229

Chapter 17 Using Hard Drives

Chapter 17

Hard Drive Maintenance

When a drive is initialized, its entire contents are

irretrievably lost. Make sure you make backups of any songs

on the drive that you want to keep before you use drive

initialize.

* If you accidentally delete data, that data cannot be restored to

its previous state. Roland Corporation assumes no liability

concerning such loss of data.

CAUTION: If you are using a drive or disk that has been

partitioned, you will not be able to choose a particular

partition that you wish to initialize. When you carry out

drive initialization, the whole drive and all its partitions will

be initialized at once.

Be aware that initializing a drive may take some time. This is not a

malfunction. For example, when physical format is turned “On,”

the time required to format a 100MB Zip disk is approximately 10

minutes. The progress of initialization will be shown in the display.

Be sure not to turn the power off until initialization is complete.

Drive Initialize

As you use a hard drive, the data on the drive is recorded

and erased repeatedly in whatever space is currently

available, and the data may become fragmented on the hard

drive. When this happens, the message “Error Drive Too

Slow” may appear in the display during certain operations.

In order to achieve maximum performance from the drive,

perform the Initializing (Formatting) procedure described on

this page.

Drive Initialize with Physical Formatting

Physical formatting is useful for new removable media and

for circumstances where you are experiencing problems with

your hard drive that cannot be corrected by normal

initialization.

To initialize a drive using Physical Format:

1. Confirm that the power of the drive and the VS-1824 is

turned on.

2. Insert a disk into the drive if you are using a removable

type drive.

3. Press [PLAY (DISPLAY)].

4. Hold [SHIFT] and press [F6 (UTILITY)].

The Utility menu icon appears in the display.

5. Press [F6 (DrIni)].

If “DrIni” does not appear in the display above [F6], first

press [PAGE] until “DrIni” is displayed, and then press

[F6 (DrIni)].

6. Use [ ], [ ], [ ], and [ ] to move the

cursor, and use the TIME/VALUE dial to set each value

described below.

Init Drive (Initialize Drive)

Select the drive (IDE, SCSI0-SCSI7). “IDE” indicates the

internal hard drive, and “SCSI” indicates external SCSI

drives. For example, use “SCSI5” to select a Zip Drive.

The SCSI ID number of the internal CD-RW

drive is fixed at “0.”

Partition

Select the partition size (500 MB, 1000 MB, 2000 MB). In

most cases, select “2000 MB.”

Physical Format

Select whether or not to use physical formatting. For new

drives, new removable media, or drives that have been

used by another device, this must be set to “On.” Also

set this to “On” if you are experiencing problems with

your hard drive that cannot be corrected by normal

initialization.

1 2 ... 224 225 226 227 228 229 230 231 232 233 234 ... 294 295

Kommentare zu diesen Handbüchern

Keine Kommentare

Roland VS-1824 Bedienungshandbuch Seite 229

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Musikinstrumente Roland VS-1824