Roland RD-700SX Bedienungsanleitung PDF herunterladen

®ÂØÒÅˆÎ

RD-700SX

Digital Piano

TurboStart

www.RolandUS.com

Page 1

Welcome

Congratulations on your purchase of the Roland

RD-700SX. This TurboStart contains step-by-step

instructions that will quickly introduce you the

RD-700SX’s major features.

Playing the Demo Songs

There are four demo songs in the RD-700SX. Use

the following procedure to play the demo songs:

1. While holding down NUM LOCK, press EDIT.

2. Use the CURSOR  and  buttons to select

the desired song.

3. To begin playback, press F2 (PLAY).

4. To stop playback, press F1 (MENU) twice.

Selecting Sounds

The RD-700SX’s categories make it easy to select

tones. Use the following procedure to select a tone:

1. Press the PIANO button in the ONE TOUCH

area.

2. Press a TONE SELECT button to select a

category such as ORGAN or STRINGS.

3. Press DEC or INC to choose a tone within the

selected category.

Layering Tones

The RD-700SX can layer up to four tones. Use the

following procedure to layer a piano tone and a string

tone:

1. Press PIANO in the ONE TOUCH area.

2. Press the PIANO TONE SELECT button, and

then press the INC/DEC buttons to select the

desired piano tone.

3. In the ZONE SWITCH/CONTROL area, press

the UPPER 2 button so it lights.

4. In the ZONE SELECT area, press the UPPER

1•2 button until the UPPER 2 indicator lights.

5. Press the STRINGS TONE SELECT button, and

then use the INC/DEC buttons to select the

desired string tone.

Tip: You can also layer tones by pressing two TONE

SELECT buttons at the same time.

Splitting the Keyboard

You can split the RD-700SX keyboard so there’s one

tone beneath your left hand and another tone

beneath your right. These tones are called “lower”

and “upper” tones, respectively. Use the following

procedure to split the keyboard:

1. Select a tone as described earlier—this sound

will play in the upper half of your split keyboard.

2. Press SPLIT so that the LOWER ONE indicator

in the ZONE SWITCH/CONTROL area is lit.

3. Press the LOWER 1•2 ZONE SELECT button

until the LOWER 1 indicator lights.

4. Press the desired TONE SELECT button to

choose the lower sound’s tone category.

5. Press the DEC/INC buttons to select the lower

sound’s tone.

6. Use the sliders located beneath UPPER 1 and

LOWER 1 in the ZONE SWITCH/CONTROL

area to control the volume for the two split tones.

7. Press SPLIT to exit Split mode.

Note: To change the keyboard’s split point, press and

hold SPLIT for several seconds to display the Split

Point menu. While continuing to hold SPLIT, press a

key where you want the new split point to be.

Transposing the Keyboard

Use the following procedure to transpose the

keyboard:

1. Press and hold the TRANSPOSE button to

display the current transpose value.

2. While holding TRANSPOSE:

• use the DEC/INC buttons to set the desired

transpose value, or

• press a key on the keyboard to set the

desired transpose value.

3. Release the TRANSPOSE button—transposition

is now active.

4. To turn off the transposition, press TRANSPOSE

so it’s not lit.

Note: The transpose value you selected will remain

in temporary memory until it is changed, or until you

power off.

1 2

TurboStart 1

Inhaltsverzeichnis

Seite 1 - TurboStart

Seite 2

Weitere Dokumente für Musikinstrumente Roland RD-700SX

Um das Dokument anzuzeigen Roland RD-700SX Bedienungsanleitung

Roland RD-700SX Bedienungsanleitung (178 Seiten)

Kommentare zu diesen Handbüchern

Keine Kommentare

Roland RD-700SX Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Musikinstrumente Roland RD-700SX herunter. Roland RD-700SX TurboStart Benutzerhandbuch

Inhaltsverzeichnis

Weitere Dokumente für Musikinstrumente Roland RD-700SX

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Musikinstrumente Roland RD-700SX