Roland VS-1824 Bedienungshandbuch PDF herunterladen (Seite 57)

Chapter 4 Recording Operations

Chapter 4

Manual Punch-In/Punch-Out

Sometimes when listening to a recording, you may find

playing mistakes or lyrics that were sung incorrectly. You

may want to correct these sections without re-recording the

entire track, or without starting the song over. In such

instances, use the following procedure to re-record selected

parts. The switching from playback to recording while a song

is playing is called a “punch-in,” and the switching from

recording back to playback is called a “punch-out.”

Manual Punch-In Using the

RECORD Button

Use the transport control buttons to punch in and out.

fig.03-07

1. Hold down [REC] and press the STATUS button for the

track you wish to re-record.

* If you want to select TR 1-12, press [FADER/MUTE]

several times until the “TR” indicator lights.

If you want to select TR 13-18, press [FADER/MUTE]

several times until the “TR” indicator blinks.

→ “Switching the Fader Functions” (p. 71)

2. Press [ZERO] to return to the beginning of the song.

3. Press [PLAY] to begin song playback.

At this point, you will hear the performance that was

already recorded on the track.

4. Press the STATUS button.

The indicator alternately blinks red and orange. Confirm

that you can hear the source you want to record in the

monitors or headphones.

5. During playback of the song, each time the STATUS

button is pressed, you will alternately hear the

previously recorded track, and then the source (input).

If necessary, use the input sensitivity knob to adjust the

input level of the source so it matches the level of the

recorded track.

6. Once you have adjusted the input sensitivity, press [STOP].

7. Move to the section of the song where you wish to re-

record.

8. Press [PLAY] to begin playback of the song.

9. When you reach the exact point in the song you wish to

re-record, press [REC]. The VS-1824 goes into Record

mode, and begins recording the new performance.

10.When you have finished recording, press [REC] once

more to punch-out.

11.Each time the [REC] button is pressed, the recorder

alternately punches in and out. Repeat Steps 9 and 10 for

any other tracks you wish to re-record.

12.Press [STOP] to stop the song.

13.To listen to the results of the punch-in and punch-out,

press [ZERO] to return to the beginning of the song and

press [PLAY].

Manual Punch-In Using the Foot

Switch

Performing a manual punch-in punch-out when both playing

an instrument and engineering your recording is difficult. In

such cases, it is convenient to use a foot switch (such as the

DP-2 or BOSS FS-5U) to do your punch-ins and -outs.

fig.03-08

Connect the optional foot switch to the VS-1824’s FOOT

SWITCH jack.

fig.03-09

1. Hold [SHIFT] and press [F5 (SYSTEM)].

The System menu icon appears in the display. If the

System menu does not appear, press [F6 (EXIT)].

2. Press [F1 (SYSPM)].

If “SYSPM” does not appear above [F1], press [PAGE]

until “SYSPM” appears, then press [F1 (SYSPM)].

Time

Recording

Playback

Start Punch-in Punch-out Stop

Time

Recording

Playback

Start Punch-in Punch-out Stop

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 294 295

Kommentare zu diesen Handbüchern

Keine Kommentare

Roland VS-1824 Bedienungshandbuch Seite 57

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Musikinstrumente Roland VS-1824