Roland VS-2000 Betriebsanweisung PDF herunterladen (Seite 43)

Chapter 3 Playback Operations

apter

post-fader levels. The current Levels setting is labeled either

“Pre” or “Post in the lower left corner of the center portion of

the display. If the current setting is pre-fader, you will see the

indicator “Pre” in the lower left corner of the level meter

display, and the label above [F4] will be “Post”. Pressing [F4]

at this point will switch the level meter to post-fader.

[F5 (F/P)] or [F5 (Meter)]:

This switches the display from Level Meters to Fader/Pan

positions for each channel.

fig.12-07

When the middle of the display is showing faders and

panning:

• Press [F1 (LMTrk)] to view the fader and pan positions

for the Track Mixer.

• Press [F2 (LM In)] to view the fader and pan positions

for the Input Mixer.

• Press [F3 (LMAux)] to view the fader and pan positions

for the AUX and EFFECT busses.

Mixer Channel Display

To view mixer settings, press any SELECT button for an

input or track. The SELECT buttons are divided into two

rows. The top row of buttons are referred to as the “Input

SELECT buttons.” This section also contains the Stereo In

and Effects 1-4 Returns. The bottom row of buttons are

referred to as the “Track SELECT buttons.”

Press Track 8 [SELECT].

All mixer settings for Track 8 appear in the display. Here,

you can change all the settings for a track, including V-

Tracks, EQ, panning, and all effects routing.

fig.trackmixscreens

Press Input 1 [SELECT].

All mixer settings for Input 1 appear in the display. Here,

you can change all settings for an input, including phase,

EQ, panning, and all effects routing.

fig.inputmixscreens

Press [PLAY(DISPLAY)] to return to the Playlist display.

Changing Track Status

You can change the status of each track by pressing the

STATUS button. The color of the status button determines

the current state of the track:

Orange:

Source

The input source assigned to the channel is heard.

Blinking Red:

Record Ready

The track is ready to be recorded. When blinking red,

previously recorded material on the track will be

heard.

Track Channel

Input Channel

Effect / AUX

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 281 282

Kommentare zu diesen Handbüchern

Keine Kommentare

Roland VS-2000 Betriebsanweisung Seite 43

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Musikinstrumente Roland VS-2000