Roland VK-88 Bedienungshandbuch PDF herunterladen (Seite 67)

Advanced Use

If you press the VIBRATO AND CHORUS [UPPER]

button, the setting will return to its initial value.

3. Press the [WRITE] button to confirm the settings.

This saves the settings.

The indicators for the [1]–[8] buttons light up while the

settings are being saved.

NOTE

Never turn off the power while parameters are being

saved.

❍ ORGAN AFTER ASSIGN

This selects the function whereby the sound is controlled

by the velocity used in the Upper Part.

1. Hold down the [BANK] button and press the [VIBES]

button.

The indicators of [1]–[8] buttons ([1] button) will blink.

2. Press one of the [1]–[8] buttons ([1] button) to select the

function.

There are nine parameters. You can select all of these

parameters by controlling the lighted/extinguished state

of the [BANK] button’s indicator.

The following parameters are assigned to each button.

[BANK] button’s indicator extinguished

[BANK] button’s indicator lighted

If you press the VIBRATO AND CHORUS [UPPER]

button, the setting will return to its initial value.

When you want to stop editing, press the [H-BAR

MANUAL] button.

3. Press the [WRITE] button to confirm the settings.

This saves the settings.

The indicators for the [1]–[8] buttons light up while the

settings are being saved.

NOTE

Never turn off the power while parameters are being

saved.

The volume of the spring shock can be adjusted with the

REVERB [LEVEL] knob. The spring shock is particularly

effective if “SPRING” is selected as the reverb type (p.

45).

NOTE

When the “SPRING SHOCK” function is assigned to the

aftertouch, please be aware that raising the reverb level

excessively will produce a high-volume impact sound.

NOTE

The aftertouch has no effect when the D BEAM [ON]

button is off while “D BEAM SYNC” is assigned to

aftertouch.

Button Parameter

[1]

OFF

Nothing is assigned.

[2]

ROTARY SLOW/FAST

The rotary speaker effect can be switched

between slow and fast. This will have the same

effect as the [SLOW/FAST] button.

[3]

ROTARY BRAKE

This button temporarily halts the rotation of the

rotary sound.

[4]

OVERDRIVE

The depth of overdrive will be controlled.

[5]

CRESCENDO

By pressing the keys down, you can gradually

increase the volume for all the harmonic bars.

When you press down fully on the keys, the

harmonic bar volumes will be at maximum, and

the rotary will switch to FAST. When you

reduce the pressure on the keys, the volume

decreases.

[6]

RING MODULATOR

Pressing down on the keys causes the ring

modulation to be applied (p. 43). The amount of

ring modulation applied varies according to

how much pressure is placed on the keys.

[7]

TONE WHEEL BRAKE

The wheel brake will be applied (p. 43).

[8]

SPRING SHOCK

This lets you produce the sound of a spring

reverb unit being jarred (p. 43).

Button Parameter

[1]

D BEAM SYNC

The same function that is assigned to the D

BEAM controller will also be assigned to the

aftertouch. When you change the function that

is assigned to the D BEAM controller, the

function that is assigned to the aftertouch will

also change.

Button Parameter

1 2 ... 62 63 64 65 66 67 68 69 70 71 72 ... 111 112

Kommentare zu diesen Handbüchern

Keine Kommentare

Roland VK-88 Bedienungshandbuch Seite 67

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Digitale Klaviere Roland VK-88