Roland VK-88 Bedienungshandbuch Seite 73
- Seite / 112
- Inhaltsverzeichnis
- FEHLERBEHEBUNG
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
75
Advanced Use
3. Turn the [VIBRATO AND CHORUS] knob to adjust
the setting.
If you press the VIBRATO AND CHORUS [UPPER]
button, the setting will return to its initial value.
4. If you want to edit another parameter, press the
[BANK] button and the appropriate button from [1]
through [8] (from [1] through [6]) to select the
parameter, and turn the [VIBRATO AND CHORUS]
knob to adjust the setting.
When you want to stop editing, press the [H-BAR
MANUAL] button.
5. Press the [WRITE] button to finalize the settings of the
MIDI-related parameters.
Parameter settings will be saved.
The indicators for the [1]–[8] buttons light up while the
settings are being saved.
NOTE
Never turn off the power while parameters are being
saved.
Connecting/disconnecting the sound generator
and keyboard
❍ LOCAL CONTROL (ON/OFF)
Connects/disconnects the internal link between the VK-
88’s sound generator (organ voice and orchestral tones)
and its keyboard and other controllers.
To prevent problems such as failure to sound, the Local
Control setting will automatically be turned on each time
the VK-88 is powered up.
NOTE
When the keyboard device connected to the MIDI
PEDAL IN connector will be disconnected from the
sound generator if Local Control is turned off.
Adding MIDI THRU functionality to the MIDI
OUT connector
❍ MIDI THRU (ON/OFF)
This is a function by which the data received at the MIDI
IN connector is re-transmitted from the MIDI OUT
connector. Data received at the VK-88’s MIDI PEDAL IN
connector will be merged, and transmitted from the MIDI
OUT connector.
The MIDI Thru setting will automatically be turned off
each time the VK-88 is powered up.
NOTE
If the VK-88 receives a large amount of MIDI data or
exclusive data, it may not be able to receive all of the
MIDI data correctly. If this occurs, reduce the amount of
MIDI data that is being transmitted from the external
device, or break up the exclusive data into smaller units.
[5]
MIDI GENERAL CONTOROLLERS
SWITCH
p. 76
[6]
MIDI PROGRAM CHANGE
SWITCH
p. 76
Button Parameter Page
Setting Explanation
ON
The sound generator will be internally
connected to the keyboard and other
controllers. Normally you will use the VK-88
with this setting.
OFF
The sound generator will be internally
disconnected from the keyboard and other
controllers.
Setting Explanation
ON
All data received at the MIDI IN connector will
be re-transmitted from the MIDI OUT
connector.
OFF The MIDI Thru function will be turned off.
- USING THE UNIT SAFELY 1
- IMPORTANT NOTES 3
- Contents 4
- Main Features 7
- 10 17 181112 9
- 21 22 2419 20 10
- 31 32 3430 11
- 42 43 44 45 46 12
- 494847 50 12
- Panel Descriptions 13
- How the VK-88 Works 14
- ■ About the ORCHESTRAL TONES 16
- ■ About the Memories 16
- Before You Begin Playing 17
- Headphones 18
- About a OUTPUT jacks 19
- About a XLR type connectors 19
- Connecting the Pedal Keyboard 20
- Pedal Switch 22
- Setting Up the Music Stand 22
- Attaching the Rear Cover 23
- Attaching the Cord Clamp 23
- ■ Turning Off the Power 24
- Listening to the Demo Songs 26
- 3 Press the [BANK] button 26
- Playing the Organ 27
- About the Organ Voice 28
- (Harmonic Bars) 29
- What Are “Feet?” 31
- Changing the Organ Sound 32
- 2 Turn the [LEAKAGE] knob 33
- 3 Turn the [KEY CLICK] knob 33
- (Percussion) 34
- Algorithm) 36
- (Vibrato and Chorus) 37
- (Rotary Sound) 38
- Changing the Amp Type 39
- (Amp Type, Overdrive, Tone) 39
- Common Organ Effects 40
- About the Effects 41
- Controller 42
- Adding Ambience (Reverb) 43
- ■ Changing the Split Point 44
- (Pedal Attack) 45
- ■ Copying a Registration 47
- Playing Orchestral Tones 48
- Tones (Pedal Sustain) 51
- Orchestral Tones 53
- Using the Controllers 54
- Using a Control Pedal 55
- Foot Switch 58
- Pedalboard (PK-25/PK-7 etc.) 58
- Using the Bender 59
- Using the Modulation Lever 59
- 2 Set the organ tone 60
- Advanced Use 61
- 0Min Max 62
- Settings That Are Saved for 63
- ■ Percussion Settings 65
- ■ Organ Voice Setting 66
- ■ Controller Settings 66
- ■ MIDI-related Settings 72
- Parameters that are Stored 79
- ■ Pedal Sustain Setting 81
- ■ Pedal Attack Setting 81
- Playing the VK-88 from an 82
- External MIDI Device 82
- ■ Connecting a Pedal Keyboard 83
- Using an External Sequencer 84
- Saving VK-88 Settings on an 85
- External Sequencer 85
- (Bulk Dump) 85
- Using the VK-88 as the 86
- Master Keyboard 86
- Mixing the Sound Module 88
- Sound with the Organ Sound 88
- Connecting a Rotary 89
- Troubleshooting 90
- ■ Error Indications 93
- ■ Registration List 94
- ■ ORCHESTRAL TONES List 95
- Edit Parameters 96
- Drum List 98
- MIDI Implementation 100
- 2. Transmitted Data 101
- 3. Parameter address map 103
- (MODEL ID = 00 65H) 103
- 4. Supplementary material 105
- MIDI Implementation Chart 106
- Main Specification 107
- Information 112
Verwandte Produkte und Handbücher für Digitale Klaviere Roland VK-88
Digitale Klaviere Roland EXR-7 Bedienungshandbuch
(152 Seiten)
(152 Seiten)
Digitale Klaviere Roland GRAND Bedienungshandbuch
(124 Seiten)
(124 Seiten)
Digitale Klaviere Roland E-600 Bedienungsanleitung
(104 Seiten)
(104 Seiten)
Digitale Klaviere Roland KF-90 Bedienungsanleitung
(194 Seiten)
(194 Seiten)
Digitale Klaviere Roland RG-1 Bedienungsanleitung
(102 Seiten)
(102 Seiten)
Digitale Klaviere Roland PK-7 Bedienungshandbuch
(14 Seiten)
(14 Seiten)
Digitale Klaviere Roland EXR-5S Bedienungshandbuch
(136 Seiten)
(136 Seiten)
© 2020, manymanuals.de. Alle Rechte vorbehalten. | 0.813 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern