Roland VK-88 Bedienungshandbuch Seite 89
- Seite / 112
- Inhaltsverzeichnis
- FEHLERBEHEBUNG
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
91
Connecting the VK-88 to External Devices
Connecting a Rotary
Speaker
In addition to providing a rotary speaker effect, the VK-88
also allows you to connect an actual rotary speaker. Connect
your rotary speaker to the ROTARY TONE CABINET
connector located on the rear panel.
fig.03-05
You can use the ROTARY [FAST/SLOW] button to
change the speed of the rotary speaker and the ROTARY
[BRAKE] button to stop the rotation of the rotary
speaker temporarily.
NOTE
The rotary speaker effect of the organ voice will not be
applied to the audio signal that is output from the
ROTARY TONE CABINET connector.
NOTE
Connecting a speaker which does not meet the following
specifications may cause malfunctions.
The pinout for the ROTARY TONE CABINET connector
is as follows:
fig.03-06
* Pin Nos. 1, 2 and 3 are the output of the organ voice and
ORCHESTRAL TONES.
* The No. 6, No. 7, and No. 8 pins are open collector output with a rated
voltage of 5–30 volts DC and a maximum rated current load of 50
mA.
* Pin no. 11 detects the connection. If the nominal input voltage is
outside the acceptable range (18–30 V DC), the connection will not
operate correctly.
• The volume of the external speaker can be adjusted by
the VK-88’s [MASTER VOLUME] knob.
• ROTARY [SLOW/FAST] button will switch the
rotational speed of the connected rotary speaker.
• ROTARY [BRAKE] button will temporarily stop the
rotation of the connected speaker. To resume rotation,
press ROTARY [BRAKE] button again, or press
ROTARY [SLOW/FAST] button.
If you do not want to output the Orchestral Tone from
the ROTARY TONE CABINET jack, press the
ORCHESTRAL TONES harmonic bars all the way in to
set the volume of the Orchestral Tones to “0,” or select a
registration that does not use the Orchestral Tones.
No.1
No.2
No.3
No.4
No.5
No.6
No.7
No.8
No.9
No.10
No.11
Pin No. Output data
No. 1 ORGAN (ROTARY)
No. 2 ORCHESTRAL TONES L
No. 3 ORCHESTRAL TONES R
No. 4 GND
No. 5 GND
No. 6 POWER ON/OFF CONTROL
No. 7 FAST CONTROL
No. 8 SLOW CONTROL
No. 9 NC
No. 10 NC
No. 11 +24 V IN
- USING THE UNIT SAFELY 1
- IMPORTANT NOTES 3
- Contents 4
- Main Features 7
- 10 17 181112 9
- 21 22 2419 20 10
- 31 32 3430 11
- 42 43 44 45 46 12
- 494847 50 12
- Panel Descriptions 13
- How the VK-88 Works 14
- ■ About the ORCHESTRAL TONES 16
- ■ About the Memories 16
- Before You Begin Playing 17
- Headphones 18
- About a OUTPUT jacks 19
- About a XLR type connectors 19
- Connecting the Pedal Keyboard 20
- Pedal Switch 22
- Setting Up the Music Stand 22
- Attaching the Rear Cover 23
- Attaching the Cord Clamp 23
- ■ Turning Off the Power 24
- Listening to the Demo Songs 26
- 3 Press the [BANK] button 26
- Playing the Organ 27
- About the Organ Voice 28
- (Harmonic Bars) 29
- What Are “Feet?” 31
- Changing the Organ Sound 32
- 2 Turn the [LEAKAGE] knob 33
- 3 Turn the [KEY CLICK] knob 33
- (Percussion) 34
- Algorithm) 36
- (Vibrato and Chorus) 37
- (Rotary Sound) 38
- Changing the Amp Type 39
- (Amp Type, Overdrive, Tone) 39
- Common Organ Effects 40
- About the Effects 41
- Controller 42
- Adding Ambience (Reverb) 43
- ■ Changing the Split Point 44
- (Pedal Attack) 45
- ■ Copying a Registration 47
- Playing Orchestral Tones 48
- Tones (Pedal Sustain) 51
- Orchestral Tones 53
- Using the Controllers 54
- Using a Control Pedal 55
- Foot Switch 58
- Pedalboard (PK-25/PK-7 etc.) 58
- Using the Bender 59
- Using the Modulation Lever 59
- 2 Set the organ tone 60
- Advanced Use 61
- 0Min Max 62
- Settings That Are Saved for 63
- ■ Percussion Settings 65
- ■ Organ Voice Setting 66
- ■ Controller Settings 66
- ■ MIDI-related Settings 72
- Parameters that are Stored 79
- ■ Pedal Sustain Setting 81
- ■ Pedal Attack Setting 81
- Playing the VK-88 from an 82
- External MIDI Device 82
- ■ Connecting a Pedal Keyboard 83
- Using an External Sequencer 84
- Saving VK-88 Settings on an 85
- External Sequencer 85
- (Bulk Dump) 85
- Using the VK-88 as the 86
- Master Keyboard 86
- Mixing the Sound Module 88
- Sound with the Organ Sound 88
- Connecting a Rotary 89
- Troubleshooting 90
- ■ Error Indications 93
- ■ Registration List 94
- ■ ORCHESTRAL TONES List 95
- Edit Parameters 96
- Drum List 98
- MIDI Implementation 100
- 2. Transmitted Data 101
- 3. Parameter address map 103
- (MODEL ID = 00 65H) 103
- 4. Supplementary material 105
- MIDI Implementation Chart 106
- Main Specification 107
- Information 112
Verwandte Produkte und Handbücher für Digitale Klaviere Roland VK-88
Digitale Klaviere Roland EXR-7 Bedienungshandbuch
(152 Seiten)
(152 Seiten)
Digitale Klaviere Roland GRAND Bedienungshandbuch
(124 Seiten)
(124 Seiten)
Digitale Klaviere Roland E-600 Bedienungsanleitung
(104 Seiten)
(104 Seiten)
Digitale Klaviere Roland KF-90 Bedienungsanleitung
(194 Seiten)
(194 Seiten)
Digitale Klaviere Roland RG-1 Bedienungsanleitung
(102 Seiten)
(102 Seiten)
Digitale Klaviere Roland PK-7 Bedienungshandbuch
(14 Seiten)
(14 Seiten)
Digitale Klaviere Roland EXR-5S Bedienungshandbuch
(136 Seiten)
(136 Seiten)
© 2020, manymanuals.de. Alle Rechte vorbehalten. | 0.128 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern