Roland VK-88 Bedienungshandbuch PDF herunterladen (Seite 66)

Advanced Use

❍ PERCUSSION H-BAR LEVEL (0–127)

Adjusts the volume of the harmonic bars when percussion

is normal (the [SOFT] button’s indicator is dark).

As this value is increased, the sound of the harmonic bars

will be less affected by the percussion.

■ Organ Voice Setting

❍ VIBRATO AND CHORUS LOWER

(VIBRATO/CHORUS LOWER&PEDAL,

VIBRATO/CHORUS LOWER)

When the VIBRATO AND CHORUS [LOWER] button is

on, you can set the vibrato or chorus so that it is applied

only to the Lower Part, or to both the Lower and Pedal

Parts.

1. Hold down the [BANK] button and press the

VIBRATO AND CHORUS [LOWER] button.

The indicators of buttons [1]–[2] will blink.

2. Press the [1] or [2] button to select the part to which the

vibrato or chorus effect is to be applied.

If you press the VIBRATO AND CHORUS [UPPER]

button, the setting will return to its initial value.

When you want to stop editing, press the [H-BAR

MANUAL] button.

3. Press the [WRITE] button to confirm the settings.

This saves the settings.

The indicators for the [1]–[8] buttons light up while the

settings are being saved.

NOTE

Never turn off the power while parameters are being

saved.

■ Controller Settings

❍ PK FOOT L ASSIGN

❍ PK FOOT R ASSIGN

With a pedalboard unit (such as the PK-25/PK-7; sold

separately) connected with a special pedalboard

connector, you can then switch the pedalboard unit’s foot

switch function.

1. To change the pedalboard’s Foot Switch L setting, hold

down the [BANK] button and press the [E. PIANO 2]

button. When changing the pedalboard’s Foot Switch R

setting, hold down the [BANK] button and press the

[CLAVI] button.

The indicators of buttons [1]–[8] will blink.

2. Press one of the buttons [1]–[8] to select the function

you want to assign to the pedalboard’s foot switch.

When you want to stop editing, press the [H-BAR

MANUAL] button.

Button Explanation

[1]

The vibrato or chorus effect is applied to both

the Lower and Pedal Parts.

[2]

The vibrato or chorus effect is applied only to

the Lower Part.

On tone wheel organs, turning the percussion on would

lower the overall volume specified by the harmonic bars.

This is because the percussion on tone wheel organs was

designed not to impair the volume balance of the entire

organ. The VK-88 allows you to adjust this change in

volume balance.

Button Parameter

[1]

ROTARY SLOW/FAST

The rotary speaker effect can be switched

between slow and fast. This will have the same

effect as the [SLOW/FAST] button.

[2]

ROTARY BRAKE

This button temporarily halts the rotation of the

rotary sound.

[3]

ORCHESTRAL TONES GLIDE

Controls the Glide function for the Orchestral

Tones. The pitch of the Orchestral Tones will

change while the foot switch is depressed, and

will gradually return to the original pitch when

the foot switch is released.

[4]

REGISTRATION UP

Steps sequentially through the registrations.

Each time the foot switch is depressed, the next

registration will be selected.

[5]

REGISTRATION DOWN

Steps sequentially through the registrations.

The registration number decreases by one each

time the foot switch is depressed.

[6]

HOLD

This will have the same effect as the Hold pedal.

[7]

SEQ START/STOP

The connected sequencer alternately starts and

stops each time the foot switch is depressed.

[8]

SEQ RESET

Depressing the foot switch returns the

sequencer to the beginning of the song.

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 111 112

Kommentare zu diesen Handbüchern

Keine Kommentare

Roland VK-88 Bedienungshandbuch Seite 66

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Digitale Klaviere Roland VK-88