Roland VK-88 Bedienungshandbuch PDF herunterladen (Seite 57)

Using the Controllers

[REGISTRATION] button’s indicator is lit

If you want to stop editing, press the [H-BAR MANUAL] button.

3 Press the [WRITE] button to finalize the function assigned to the control

pedal.

The function assigned to the control pedal will be saved.

The indicators for the [1]–[8] buttons light up while the settings are being saved.

[8]

ORCHESTRAL TONES

EXPRESSION

Select this when you want to use the

expression pedal to control the volume of

the Orchestral Tones.

While this function is being used, the

expression pedal connected to the

EXPRESSION PEDAL jack will affect only

the volume of the organ.

Button Parameter Page

[1] D BEAM SYNC

The same function that is assigned to the

D BEAM controller will also be assigned

to the control pedal. When you change the

function that is assigned to the D BEAM

controller, the function that is assigned to

the control pedal will also change.

[2] CRESCENDO

As you depress the expression pedal

connected to the EXPRESSION PEDAL

jack, the volume of all harmonic bars will

gradually become louder.

When the expression pedal is fully

depressed, the harmonic bar volumes will

be at maximum, and the rotary will switch

to FAST. As you return the expression

pedal toward yourself, the volume will

decrease.

[3] RING MODULATOR

When you depress the control pedal, the

ring modulator (p. 43) will be applied. The

depth to which you depress the control

pedal will control the depth of the ring

modulator.

[4] TONE WHEEL BRAKE The wheel brake will be applied (p. 43).

[5] SPRING SHOCK

This lets you produce the sound of a

spring reverb unit being jarred (p. 43).

Button Parameter Page

NOTE

The control pedal has no effect

when the D BEAM [ON]

utton is off while “D BEAM

SYNC” is assigned to the

control pedal.

NOTE

When the “SPRING SHOCK”

function is assigned to the

control pedal, please be aware

that raising the reverb level

excessively will produce a

high-volume impact sound. If

you want to reduce the volume

of the impact sound, use the

REVERB [LEVEL] knob to

adjust the reverb level (p. 45).

If you press the VIBRATO

AND CHORUS [UPPER]

utton, the setting will return

to its initial value.

NOTE

Never turn off the power

while the setting are being

saved.

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 111 112

Kommentare zu diesen Handbüchern

Keine Kommentare

Roland VK-88 Bedienungshandbuch Seite 57

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Digitale Klaviere Roland VK-88