Roland VM-C7200 Bedienungshandbuch PDF herunterladen (Seite 9)

In addition, while holding down SHIFT, you can press:

• CH LEVEL—CUE LEVEL in green—to control the amount of signal

sent from each input channel to the cue monitoring system.

• CH PAN—or CUE PAN in green—to control the stereo positioning of

each signal sent from an input channel to the cue monitoring

system.

• PREAMP GAIN—SURROUND DEPTH—to control the position of

the input channels’ signals in the three-dimensional surround field.

• 1-6 to control the amount of input signal sent to Flex Busses 7-12,

respectively.

We’ll discuss the SHIFT button in greater detail later on.

In other operating modes, the PARAM VIEW on Fader buttons assign

fader control to parameters for the job at hand.

When this button is lit: You can choose parameters:

MULTI IN CH 1-24

FADER GROUP MASTER 1-24

FLEX BUS MASTER 1-12

MULTI OUT 1-24

The PARAM VIEW on Fader Buttons (Continued)

®ÂØÒÅˆÎ Application Guide Getting Started with the VM-7000

that control incoming R-BUS digital

signals. The parameters are similar

to those available for INPUT CH 1-

24. PREAMP GAIN is not offered

since R-BUS digital signals don’t

pass through a preamp.

that control the fader groups. There’s

only one, CH LEVEL, which controls

their levels.

that control the Flex Busses and the

outputs of internal send-and-return

effects. CH LEVEL sets their output

level. CH PAN sets their stereo

position in the main mix. Send the

channels’ signal to another Flex Bus

by pressing the 1-12 button for the

Flex Bus to which you want to send

it. OTHER PARAMETERS provides

access to the SURROUND LR-C

parameter that lets you set how the

signal will be sent to a front-center

speaker in a surround system. SHIFT

+ CH LEVEL, CH PAN or PREAMP

GAIN let you to set its level and pan

in the cue system or set its surround

position, respectively.

that control the R-BUS, DIGITAL A

and B and ASSIGNABLE outputs.

Only CH LEVEL is necessary.

If you press a PARAM VIEW on Fader button and nothing changes on

the display, you may have pressed a button that has no associated

parameter in the current operating mode.

The lit SECTION and PARAM VIEW on Fader buttons tell you at a

glance what the faders are currently controlling.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 52 53

Kommentare zu diesen Handbüchern

Keine Kommentare

Roland VM-C7200 Bedienungshandbuch Seite 9

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Prozessoren Roland VM-C7200