Roland VM-C7200 Bedienungshandbuch PDF herunterladen (Seite 27)

Insert Effects

When you want an effect-processed version of a signal to completely

replace the original signal, you’ll use an “insert” effect routing. You’ll

want to do this when using effects such as dynamic processors, EQs,

mic and amp modelers, rotary speakers, hum cancelers and so on—in

each case you want to wind up with

only the processed signal.

An insert effect gets its name from the fact that it’s inserted into the

signal’s path, causing the signal to take a detour through the effect

before continuing on its way. In the VM-7000, you can re-direct a signal

into and out of an insert effect in various places.

You can re-direct:

• an input channel’s signal into and back out of an insert effect just

before it reaches the channel EQ.

• an input channel’s signal into and back out of an insert effect just

before it reaches the channel fader.

• a multi in channel’s signal into and back out of an insert effect just

before it reaches the channel EQ.

• a multi in channel’s signal into and back out of an insert effect just

before it reaches the channel fader.

• an internal Flex Bus’s signal into and back out of an insert effect.

• an external Flex Bus’s signal into and back out of an insert effect.

• the system’s main output into and back out of an insert effect.

• the system’s monitor output into and back out of an insert effect.

We’ll describe how to set up an insert effect in a few moments.

How Effects 1 and 2 Can Be Inserted

Effects 1 and 2—the effects that ship with every VM-7000—are the

system’s most flexible effects. You can:

• insert them on any input and multi in signal at any time.

• insert them on external Flex Busses if you want to send a group of

signals through internal effects.

• insert them on the system’s main and monitor outputs.

How Effects 3-8 Can Be Inserted

Effects 3-8—the effects produced by up to three optional VS8F-2

boards—provide insert processing for specific input or multi in channels.

This VS8F-2... ...provides: ...for inserting on Input or Multi In:

A Effects 3 and 4 Channels 1-4, 13-16

B Effects 5 and 6 Channels 5-8, 17-20

C Effects 7 and 8 Channels 9-12, 21-24

When you wish to insert the two effects supplied by an optional VS8F-2,

you begin by assigning the VS8F-2 to the desired input or multi input

channels using the following procedure:

1. Press EFFECTS 1-8.

2. Press CURSOR DOWN to select the bottom row of parameters.

3. Press F6 [JUMP].

4. Use the CURSOR buttons to select the desired VS8F-2.

5. Turn V1 [SELECT] to choose INPUT or MULTI IN. For our

example, choose INPUT for all of your VS8F-2s.

6. Press F1 [SET] and F5 [OK] to execute each change.

Understanding the Internal Effects (Continued)

®ÂØÒÅˆÎ Application Guide Getting Started with the VM-7000

Signal

Effect

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 52 53

Kommentare zu diesen Handbüchern

Keine Kommentare

Roland VM-C7200 Bedienungshandbuch Seite 27

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Prozessoren Roland VM-C7200