Roland VM-C7200 Bedienungshandbuch PDF herunterladen (Seite 23)

In a real session, you could listen to what’s on Flex Bus 1 by

listening to the track on the multitrack recorder through one of the

VM-7000’s input or multi in channels. For now, let’s listen to Flex

Bus 1 on the VM-7000 itself to hear what’s going to the

ASSIGNABLE OUT 4 jack.You can also use this technique to

create a basic mix when sending signals to a monitor—your

performers can then help you refine the mix by telling you what they

need to hear.

11. Press SOURCE SELECT. This screen lets you choose what will

be heard in the VM-7000’s own monitor feed.

12. Turn V1 [SELECT] to choose FBUS 1—you’re now listening to

Flex Bus 1 itself, though there’s nothing to be heard there yet.

13. Press F6 [EXIT] to return to the FBus Send 1 screen.

14. Use the first two faders to set the amount of signal sent from Input

Channels 1 and 2 to Flex Bus 1, and therefore to ASSIGNABLE

OUT 4.

Before proceeding to the next section, bring the first two faders all the

way down.

You can also send a stereo submix of signals to external devices by

sending them out on a linked pair of Flex Busses. You would do this, for

example, when:

• you want to combine a group of drum mics into a single stereo

image to be recorded on two tracks of a multitrack recorder. This

would be the case if you wanted to mix your cymbal and tom mics

into a pair of drum kit overhead tracks. You can also use this

technique when recording groups of singers, horn or string players,

percussionists and so on.

• you want to create a stereo monitor mix for your performers.

• you wanted to send multiple signals to an external effect processor

with true stereo inputs.

Here’s how to do this using Flex Busses 1 and 2:

1. Press FADER UTILITY.

2. Press F1 [CHANNEL LINK].

3. Press PAGE DOWN twice to display the FLEX BUS channel-

linking page.

4. Press F1 [LINK]—Flex Busses 1 and 2 are now linked as a single

stereo entity. You can link any odd/even pair of Flex Busses.

Let’s route the two Flex Busses to ASSIGNABLE OUTs 4 and 5.

5. Press FLEX BUS MASTER 1-12.

6. Hold down Flex Bus Channel 1’s CH EDIT button and press MULTI

OUT.

®ÂØÒÅˆÎ Application Guide Getting Started with the VM-7000

XXIV. Routing Signals to a Pair of Flex Busses

Routing Signals to an External Flex Bus (Continued)

Note that the round FLEX BUS 1 and 2 buttons are both now lit.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 52 53

Kommentare zu diesen Handbüchern

Keine Kommentare

Roland VM-C7200 Bedienungshandbuch Seite 23

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Prozessoren Roland VM-C7200