Roland VM-C7200 Bedienungshandbuch PDF herunterladen (Seite 13)

Here’s how to use QUICK CH EDIT:

• Hold down a channel’s CH EDIT button for a

moment, and, without letting go, press the desired

QUICK CH EDIT button. Release both buttons

when the desired parameter screen appears.

At the top of each channel

strip you’ll find a STATUS

button with the channel’s

number printed above it.

The STATUS buttons work together with the MODE

buttons located to their right. These buttons let you:

• mute a channel by silencing its signal.

• solo a channel by silencing all other channels.

• send a channel’s audio signal into the main stereo mix.

• place an external recorder track in record-ready mode so that you

can record the channel’s audio on the track.

• place an external recorder track in playback mode so that you can

play back the channel’s audio that’s been recorded on the track.

• use the VM-7000’s Automix automation feature to record and play

back changes you make to channel parameter values.

What the channel STATUS buttons do depends on which MODE and

SECTION button is lit. In each case, the color of the STATUS button—or

the fact that it’s not lit at all—tells you the channel’s current status.

• When MUTE is lit, you can press a channel’s STATUS button to

silence the channel (red), or turn it back on (unlit). This doesn’t

apply to multi out channels, which can’t be muted.

• When SOLO is lit, you can press a channel’s STATUS button to solo

the channel (amber), or un-solo it (unlit). This doesn’t apply to multi

out channels, which can’t be soloed.

• When AUDIO is lit, what the STATUS buttons do depends on the

type of channel you’re working with:

• When you’re working with input, multi in or Flex Bus channels,

you can press STATUS to send a channel’s signal into the main

stereo mix (green) or not (unlit).

• When you’re working with fader group channels, pressing

STATUS has no effect.

• When you’re working with multi out channels, you can press

STATUS to record-enable the corresponding track on an

external recorder (red), or set it to playback (green).

• When AUTOMIX is lit, you can press STATUS to begin recording

changes you make to parameter values (red), play them back

(green), or turn off Automix for the channel (unlit).

When we refer to a STATUS button from here on, we’ll show the lit

MODE button in parentheses—as in (AUDIO) STATUS—where relevant.

The CH EDIT Buttons (Continued)

®ÂØÒÅˆÎ Application Guide Getting Started with the VM-7000

For example, to jump to an

input channel’s preamp

parameters, hold down its

CH EDIT button and press

the PREAMP GAIN STATUS

button.

When working with Flex Bus channels, only STATUS

buttons 19-24 invoke QUICK CH EDIT parameter

screens.

XVI. The STATUS and MODE Buttons

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 52 53

Kommentare zu diesen Handbüchern

Keine Kommentare

Roland VM-C7200 Bedienungshandbuch Seite 13

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Prozessoren Roland VM-C7200