Roland VM-C7200 Bedienungshandbuch PDF herunterladen (Seite 49)

One of the best things about a digital mixer like the VM-7000 is that it

can remember and instantly recall your setups. Much of the time spent

mixing is spent setting things up, so this is a great time-saver. In the

VM-7000, each setup that you save is called a “scene.”

With a one-processor system, the VM-7000 allows you to store 100

scenes in each project, numbered from 00-99. With two processors, you

can store 50. In either case, scenes require an installed memory card

on which you’ve already created a project.

What’s Stored in a Scene?

A scene captures all of your input and multi in channel settings—

including their input and output connections, preamp, delay, dynamics,

and EQ settings—as well as your main mix, cue mix, Flex Bus, multi

out, effect and fader group settings (see p. 104 in the VM-C7200/C7100

Owner’s Manual

to learn about fader groups).

When you recall a scene, you can select the settings to be loaded, as

we’ll see in a moment.

Scene Buttons and Banks

Each scene is selected using a two-digit number that identifies the

scene memory location in which it’s stored. Scenes that share a

common first digit are said to belong to the same scene “bank.” For

example, scenes 00-09 all belong to Scene Bank 0.

You can select a scene memory location—when you want to save,

re-name, recall or clear a scene—by typing its number on the

VM-7000’s numeric keypad.You’ll type one or both of its digits,

depending on the scene location you want to choose.

When a scene memory location contains a scene, the corresponding

number button on the numeric keypad lights.

Selecting a Scene Location

To select a scene location in a bank other than the currently selected

scene bank:

• Press SCENE—all of the scene buttons begin to flash.

• Type the desired location’s first digit. The button you press will flash,

and then all of the number buttons will light. Finally, the lights will

turn off for all locations that don’t currently contain scenes.

• Type the desired location’s second digit.

To select a scene location in the currently selected bank:

• You need only type the scene’s second digit.

Storing a Scene

When you’d like to save your current settings as a scene, simply select

an unused memory location using the appropriate method.

Let’s demonstrate this by saving a couple of scenes in Bank 6:

1. Press SCENE.

2. Press 6 on the numeric keypad.

®ÂØÒÅˆÎ Application Guide Getting Started with the VM-7000

XXXV. Scenes

The number of the currently active scene is always shown in the upper-

righthand corner of the display, as we mentioned back on Page 10.

1 2 ... 44 45 46 47 48 49 50 51 52 53

Kommentare zu diesen Handbüchern

Keine Kommentare

Roland VM-C7200 Bedienungshandbuch Seite 49

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Prozessoren Roland VM-C7200