Roland VS-880EX Bedienungsanleitung Seite 84
- Seite / 192
- Inhaltsverzeichnis
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
45. “FX2 MstIns=” appears in the display. Rotate the
TIME/VALUE dial. If you wish to insert effect 2
into the master out, select “On.” If not, select
“Off.” If effect 2 has been inserted in another
channel, the display will indicate “—” and this
item cannot be set.
46.
Press PARAMETER [ ]. You can return to the
previous screen by pressing PARAMETER [ ].
47. “Change Routing ?” appears in the display. Press
[YES]. When the routing has been finalized,
“Complete” appears in the display, and you will
return to Play condition. If you decide to discard
the routing that was set, press [NO].
Storing Mixdown Settings
(Mixdown/Step Edit)
Select this when you want adjust the balance of each
track or to record a MD recorder or similar input in
two-channel stereo. Additionally, when playing back
all 16 tracks, by mixing the output of the VS-880EX
along with the output of a synchronized MIDI
sequencer or other such device, you can also record to
MD recorders or similar devices.
* By Step Editing a mixdown, you can change the track and
source settings to be the same. If you wish to change the
track settings, press [FADER (EDIT)] to make the
FADER indicator light green. If you wish to change the
source settings press [FADER (EDIT)] to make the
FADER indicator light orange. Here we will explain the
example of how to change the track settings.
1. Press [EZ ROUTING] several times until “EZR
Mix Down ?” appears in the display.
2. Press [YES].
“EZR Use Template” (do you wish to apply the tem-
plate?) appears in the display.
3. Press [NO].
4. “TR* Link=” or “IN* Link=” (“*” is the displayed
track/source) appears in the display. Select the
tracks/sources for which you wish to turn
Channel Link ON. Press the STATUS button for
the track/source for which you wish to turn on
Channel Link, and use the TIME/VALUE dial.
5.
Press PARAMETER [ ]. You can return to the
previous screen by pressing PARAMETER [ ].
6. “TR* =” or “IN* =” appears in the display. Specify
the tracks/sources that you wish to output to the
mix bus. Press the SELECT (CH EDIT) button for
the corresponding track/source, and use the
TIME/VALUE dial. Tracks/sources which are
turned “On” will be output.
7. “Pan =” appears in the display. Adjust the pan of
the track/source. Press the SELECT (CH EDIT)
button for the track/source whose pan you wish
to adjust, and use the TIME/VALUE dial. You
can also adjust the pan using the pan knobs on the
top panel.
* When Channel Link is on, adjust the Offset Balance of the
sources/tracks. (p. 151)
CONDITION MARKER#
MASTER
INPUT TRACK
AUX
TIME
48
24
4
0
dB
12
CONDITION MARKER#
MASTER
INPUT TRACK
AUX
TIME
48
24
4
0
dB
12
CONDITION MARKER#
MASTER
INPUT TRACK
AUX
TIME
48
24
4
0
dB
12
CONDITION MARKER#
MASTER
INPUT TRACK
AUX
TIME
48
24
4
0
dB
12
Chapter 5 Storing Mixer Settings
84
- OWNER'S MANUAL 1
- USING THE UNIT SAFELY 3
- IMPORTANT NOTES 5
- Handling the Disk Drive 6
- Concerning Copyright 6
- About SCMS 6
- Disclaimer of Liability 6
- About the License Agreement 6
- CONTENTS 10
- Preparations 12
- Connectivity 13
- Substantial Options 13
- Front and Rear Panels 14
- Recorder Section 16
- Display section 18
- Rear Panel 19
- Saving and Managing Data 21
- About Events 23
- Mixer Section 24
- Input Mixer 26
- Track Mixer 27
- Effect Return Mixer 27
- Effects Section 31
- Chapter 2 Basic Operation 32
- Turning Off the Power 33
- Restarting 33
- Basic Operations on the VS 34
- Switching Track Conditions 35
- Changing the Current Time 36
- Storing a Time Location 36
- 00h00m00s00 Time 37
- 0123 456 38
- TA PCLEAR 39
- Recording 40
- General Course of the 41
- Recording Process 41
- Connecting Instruments 41
- Recording to the Tracks 42
- Saving a Recorded 43
- Performance (Song Store) 43
- Recording Over a Portion of 44
- (Punch-In/Punch-Out) 44
- Using Locators 45
- Playback 47
- Recording to Other Tracks 49
- (Overdubbing) 49
- Using Effects 50
- Select an Effect 51
- Effect Number Effect Name 52
- MASTER (L, R) 54
- Recording Digital Signals 55
- Using the 3-Band Equalizer 57
- Adjusting the Equalizer 57
- Gain Frequency 58
- Frequency Q (definition) 59
- Combining the Contents of 60
- Tracks (Track Bouncing) 60
- Record and Check the Content 62
- Creating a Master Tape 63
- Protecting Performances 65
- To Remove Song Protect 65
- Composition of the Effects 66
- Connecting the Effects 66
- Selecting Effects (Patch) 70
- Creating New Effects Sounds 71
- When Saving to User Patches 72
- When Storing to a Scene 72
- Making Mixer Settings 74
- Automatically (EZ Routing) 74
- Recalling Mixdown Settings 76
- (Mixdown/Template) 76
- Storing Recording Settings 77
- (Recording/Step Edit) 77
- (Bouncing/Step Edit) 81
- Storing Mixdown Settings 84
- (Mixdown/Step Edit) 84
- Recalling User Routing 87
- Deleting User Routings 87
- About Editing Operations 88
- Track Edit 88
- Repeating Performance Data 89
- (Track Copy) 89
- Start End To TimeFrom 90
- Moving Performance Data 91
- (Track Move) 91
- Exchanging Performance Data 92
- Inserting a Blank Space Into 93
- TimeStart End 94
- Erasing Performance Data 95
- (Track Erase) 95
- Start To End Time 96
- Start End To Time 96
- Example 1: Compression 96
- Example 2: Expansion 96
- Before You Use a Zip Drive 99
- Connecting the Zip Drive 99
- Initializing the Disk 100
- (Drive Initialize) 100
- Checking Disk Reliability 101
- Saving Performance Data to 102
- Saving a Song to a Single 103
- Disk (Playable) 103
- (Drive Select) 104
- To Load Data from Disks 104
- When You Cannot Save a 105
- Song to a Single Disk 105
- (Archives) 105
- About power-save mode 106
- To Power Outlet 107
- Creating an Audio CD 108
- Writing Songs to CD-R Discs 109
- Play time 110
- Added SongPrevious Song 111
- Track Number 111
- M1 M2 M3 M97 M98 112
- Song 1 Song 2 Song 3 112
- Song 98 Song 99 112
- 00h00m00s00 112
- Saving Songs to CD-RW 113
- Discs (CD-R Backup) 113
- Saving Songs to CD-RW Discs 114
- Song Number 115
- Song Name 115
- Sample Rate Recording Mode 115
- Synchronizing with MIDI 116
- Sequencers 116
- MIDI Sequencer 118
- (implements MTC) 118
- MIDI OUT 118
- Using the Sync Track (Master) 119
- What is the Sync Track? 120
- Recording MIDI Clock Messages 120
- Synchronized Operation 120
- Using the Tempo Map (Master) 121
- What is a Tempo Map? 121
- Creating a Tempo Map 121
- Use with a MIDI Controller 126
- Switching Scenes 127
- Switching Effects 127
- Adjusting Effects 127
- Before Backing Up with DAT 128
- Items Necessary for DAT 128
- Saving Song Data to a DAT 129
- Recorder (Backup) 129
- CONDITION MARKER# 130
- Loading Performance Data 131
- (Recover) 131
- Checking Names of Saved 133
- Performance Data (Name) 133
- Checking the Recording 134
- Condition of Saved 134
- Performance Data (Verify) 134
- DAT Recorder 135
- Digital Out 135
- Chapter 11 Compatibility 136
- Song Data Compatibility 137
- Previewing Techniques 140
- (Preview) 140
- Waveform display 141
- Scrub Length (45 msec) 141
- Recalling a Specific Location 142
- Recording Mixer Settings 142
- (Auto Mix) 142
- Preparations for Auto Mix 143
- (Snapshot) 143
- Undoing Recordings and 146
- Edits (Undo) 146
- Listening Only to a Specific 148
- Channel (Solo/Mute) 148
- Simultaneously Adjusting a 149
- Stereo Source (Channel Link) 149
- Adjusting the Pan 150
- Mixing In a Stereo Source 152
- (Stereo In) 152
- Changing the Pitch During 152
- Playback (Vari-Pitch) 152
- Directly Inputting Numeric 153
- Characters 153
- Sounding the Metronome 154
- MIDI IN B 155
- When the Disk Has Little 156
- Remaining Space 156
- Changing the Name of 157
- Performance Data 157
- (Song Name) 157
- Adjusting the Levels for Each 157
- When Using Balanced Inputs 158
- Determining Output 158
- DIGITAL OUT Connectors 159
- AUX Jacks 159
- Confirming That a Drive is 160
- Not Damaged (Drive Check) 160
- Switching the Display 163
- Checking the Size of a 164
- Recorded Performance 164
- System Settings for Each 164
- When Using the Foot Switch 165
- Overall Settings for the VS 166
- Overall Settings for 168
- Playback and Recording 168
- Resetting Mixer and System 169
- Settings to Their Original 169
- MASTER SLAVE 170
- Settings for the VS-880EX 174
- MASTER (A) SLAVE (B) 176
- Recording to Cakewalk 178
- Recording to the VS-880EX 179
- 30 MIX Offset Bal 181
- 89 MIX Offset Bal 181
- Preparations for Compu Mix 182
- Recording with Compu Mix 183
- To Have the Fader Movements 183
- Using External Effects 185
- Chapter 14 189
- Information 190
- IMPORTANT SAFETY INSTRUCTIONS 191
- SAVE THESE INSTRUCTIONS 191
Verwandte Produkte und Handbücher für Musikinstrumente Roland VS-880EX
Musikinstrumente Roland VS-1680 Bedienungsanleitung
(136 Seiten)
(136 Seiten)
Musikinstrumente Roland KR107 Bedienungsanleitung
(196 Seiten)
(196 Seiten)
Musikinstrumente Roland PCR-500 Bedienungsanleitung
(100 Seiten)
(100 Seiten)
Musikinstrumente Roland VS-1824 Bedienungsanleitung
(140 Seiten)
(140 Seiten)
Musikinstrumente Roland X-6 Bedienungsanleitung
(348 Seiten)
(348 Seiten)
Musikinstrumente Roland FR-5b Bedienungsanleitung
(118 Seiten)
(118 Seiten)
Musikinstrumente Roland TD-12 Bedienungsanleitung
(108 Seiten)
(108 Seiten)
Musikinstrumente Roland KR-115 Bedienungsanleitung
(228 Seiten)
(228 Seiten)
Musikinstrumente Roland R-1 Bedienungsanleitung
(160 Seiten)
(160 Seiten)
© 2020, manymanuals.de. Alle Rechte vorbehalten. | 0.726 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern