Roland VS-880EX Bedienungsanleitung PDF herunterladen (Seite 149)

Simultaneously Adjusting a

Stereo Source (Channel Link)

When recording or playing back a stereo source, nor-

mal mixer operations require you to control the left

and right channels separately, which can make it

inconvenient to adjust equalizer, effects, and other set-

tings. In such cases, you can have the settings for a

pair of channels, with the exception of the fader and

pan settings, linked so that they adjusted in the same

way. This is called the Channel Link.

When Channel Link is on, adjacent odd- and even-

numbered channels are paired as shown below. The

settings of each odd-numbered channel will be the

same as the settings of the corresponding even-num-

bered channel. When the setting of one channel are

modified, the settings of the paired channel will

change in the same way.

At this time, you can use the channel faders and pan

knobs to make the following adjustments.

Odd-numbered channel faders:

Overall volume level of the signal that is output to the

mix bus or the recording bus (Offset Level)

Off-numbered channel pan knobs:

Overall left/right balance of the signal that is output

to the mix bus or the recording bus (Offset Balance)

Even-numbered channel faders:

Overall volume level of the signal that is output to the

AUX bus (AUX level)

Even-numbered channel pan knobs:

Overall left/right balance of the signal that is output

to the AUX bus (AUX balance)

1. Press [CH EDIT (SELECT)] for the channels for

which you wish to have Channel Link turned on.

2. Press PARAMETER [ ] [ ], so that

“Channel Link=” appears in the display.

3. Rotate the TIME/VALUE dial. For now, select

“On.”

Channel Link

This turns the Channel Link function on and off.

4. Press [PLAY (DISPLAY)].

Return to Play condition.

Adjusting the Faders

When Channel Link is on, the balance of both channels

is preserved, and the total volume level controlled

with fader for the odd-numbered channel. If you want

the channel faders to act independently, use the fol-

lowing procedure.

1. Press [CH EDIT (SELECT)] for the channels for

which you wish to adjust that channel’s fader.

2. Press PARAMETER [ ] [ ], so that “MIX

Sw =” appears in the display.

3. Rotate the TIME/VALUE dial.

MIX Sw (Mix Switch)

This selects the bus to which the source or track out-

put will be assigned. For this example select “On.”

On: The source or track will not be assigned to a

recording bus, but will be sent directly to the

mix bus. Set this to “On” when, for example,

you simply want to mix the inputs without

recording the source. However, the sources that

are assigned to the RECORDING bus are dis-

abled.

Off: The source or track will not be assigned to the

mix bus. If it is not assigned to a recording bus

either, then that source/track will not be output

anywhere.

4. Press PARAMETER [ ], so that “MIX Level”

appears in the display.

5. Rotate the TIME/VALUE dial.

MIX Level

Adjust the volume level (0–127) of the signal that is

output to the mix bus or the recording bus.

Channel 1

Channel a

Channel b

Channel c

Channel d

Channel 3

Channel 5

Channel 7

CONDITION MARKER#

MASTER

INPUT TRACK

AUX

TIME

Mix Level (In the example, 100)

Chapter 12 Other Convenient Functions

149

Chapter 12

1 2 ... 144 145 146 147 148 149 150 151 152 153 154 ... 191 192

Kommentare zu diesen Handbüchern

Keine Kommentare

Roland VS-880EX Bedienungsanleitung Seite 149

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Musikinstrumente Roland VS-880EX