Roland VS-880EX Bedienungsanleitung PDF herunterladen (Seite 166)

Overall Settings for the VS-

880EX

These are setting related to the overall operation of the

VS-880EX.

Holding the function of [SHIFT]

(Shift Lock)

You can temporarily hold functions by pressing

[SHIFT]. Operations such as switching V-tracks or sav-

ing songs can be performed with one hand.

1. Press [SYSTEM] several times until “SYS System

PRM ?” appears in the display.

2. Press [YES].

3. Press PARAMETER [ ] several times until

“SYS Shift Lock=” appears in the display.

4. Rotate the TIME/VALUE dial.

Shift Lock (Shift Lock Switch)

Setting to “On” temporarily holds the [SHIFT] button

function.

5. Press [PLAY (DISPLAY)].

Return to Play condition.

6. Afterwards, the [SHIFT] button indicator light

goes on and off each time the button is pressed.

[SHIFT] is in effect when the indicator is lit. The

hold is lifted the next time another button is

pressed or if the TIME/VALUE dial is rotated.

Displaying Measures and Beats

If both the metronome is being used and MIDI clock

messages are being transmitted, the measure and beat

of the song can be displayed in the graphic display.

When you are running in synchronization with an

external device or recording a song along with a previ-

ously-created tempo map, this allows you to operate

the VS-880EX just as though you were operating a

MIDI sequencer. Set the metronome to sound as

described in “Sounding the Metronome” (p. 154).

1. Press [SYSTEM] several times until “SYS System

PRM ?” appears in the display.

2. Press [YES].

3. Press PARAMETER [ ] several times until

“SYS MeasureDsp=” appears in the display.

4. Rotate the TIME/VALUE dial.

MeasureDsp

Use this to select whether or not the measure and beat

appear in the graphic display.

Always: The measure and beat are constantly dis-

played.

Auto: The measure and beat are not displayed

when the metronome is not in use.

5. Press [PLAY (DISPLAY)].

Return to Play condition.

Example Procedure for Switching the Solo

Function ON

1. Press [SHIFT] and immediately release the

button.

The SHIFT indicator lights. The display will

briefly indicate “Shift Lock.” The display in the

“CONDITION” field will alternate between the

name of the current condition and “sft,” also indi-

cating that the Shift Lock function is on.

2. Press[SOLO (EZ ROUTING)].

The display will briefly indicate “SOLO Mode

ON,” indicating that the Solo function is on. The

SHIFT indicator goes off.

When Holding Down the [SHIFT] Button

If [SHIFT] is held down during the operation, the

Shift Lock function will be ignored. For example,

if you hold down the [SHIFT] and press

[AUTOMIX (VARI PITCH)], Shift Lock will not be

turned on when you take your finger off [SHIFT].

The function of [SHIFT] itself remains in effect, so

the the Vari-Pitch function is on at this time.

Additionally, rotating the TIME/VALUE dial

while holding down the [SHIFT] button increases

or decreases the value of some parameter setting

by a factor of ten (or 1/10).

Chapter 13 Making Global Settings and Checking Conditions

166

1 2 ... 161 162 163 164 165 166 167 168 169 170 171 ... 191 192

Kommentare zu diesen Handbüchern

Keine Kommentare

Roland VS-880EX Bedienungsanleitung Seite 166

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Musikinstrumente Roland VS-880EX