Roland VS-1680 Bedienungshandbuch PDF herunterladen (Seite 64)

Using the Foot switch

(Manual Punch-In 2)

Use a foot switch to punch in and out. Using Punch-

In/Punch-Out when both performing on an instru-

ment and recording at the same time is difficult. In

such instances, it is convenient to use a foot switch

(such as the DP-2 or the BOSS FS-5U) to do your

switches.

fig.03-08(punch2.eps)

Connect an optional foot switch (such as the DP-2 or

the BOSS FS-5U) to the VS-1680’s FOOT SWITCH jack.

fig.03-09(ftsswconnec.eps)

1. Hold down [SHIFT] and press [F5 (SYSTEM)].

The System menu icon appears in the display. If the

System menu icon does not appear, then press [F6

(EXIT)].

2. Press [F1 (SYSPM)]. If “SYSPM” does not appear

in [F1], first press [PAGE] until “SYSPM” is dis-

played, then press [F1 (SYSPM)].

3. Using [ ], [ ], [ ], and [ ], select “Foot

Sw.” If “Foot Sw” does not appear in the display,

the press [F2 (Prm 2)].

fig.03-10(footsw.eps)

FootSw (Foot switch icon)

Set the function of the foot switch connected to the

FOOT SWITCH jack.

Play/Stop: Repeats playback and recording each

time the foot switch is pressed.

Record: Performs the same function as [REC].

This is used for switching between

recording and playback during manual

Punch-In Recording.

TapMarker: Performs the same function as [TAP].

Pressing the foot switch sets a Marker at

the mark point.

Next: Performs the same function as [NEXT].

Moves to the beginning or end of the fol-

lowing phrase each time the foot switch is

pressed.

Previous: Performs the same function as [PREVI-

OUS]. Moves to the beginning or end of

the previous phrase each time the foot

switch is pressed.

GPI: Controls playback and recording of the

song depending on the GPI trigger signal

received from the FOOT SWITCH jack.

GPI (Appendices p. 63)

4. Select “Record” with the TIME/VALUE dial.

5. Press [PLAY (DISPLAY)].

Return to Play condition.

Now, you can switch the setting of the FOOT SWITCH

jack between Punch-In and Punch-Out by the foot

switch. Carry out Manual Punch-In as described in

“Using the Record Button (Manual Punch-In 1” (p. 63).

However, use the foot switch instead of the [REC] but-

ton to perform the operation.

Specifying Beforehand the Location

for Rerecording (Auto Punch-In)

You can automatically punch in and punch

out at previously specified locations. This

function is called Auto Punch-In. This is

convenient when you need to punch in or out at a pre-

cise time. Before you begin recording, set the times for

punch-in/punch-out. There are three ways to set these

times as described below. Use the method appropriate

for your situation.

Time

Recording

Playback

Start Punch-in Punch-out Stop

Chapter 3 Multi-Track Recording

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 211 212

Kommentare zu diesen Handbüchern

Keine Kommentare

Roland VS-1680 Bedienungshandbuch Seite 64

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Musikinstrumente Roland VS-1680