Roland VS-1680 Bedienungshandbuch Seite 18

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 212
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 17
1. POWER Switch
This switch turns power of the VS-1680 on and off.
2. AC IN (AC Inlet)
Connect the included power cable here.
3. SCSI Connector
This is a DB-25 type SCSI connector for connecting
disk drives such as a Zip disk drive or a CD-R drive.
4. MIDI Connectors (IN, OUT/THRU)
External MIDI devices (MIDI controllers, MIDI
sequencers, etc.) can be connected here.
IN: This connector receives MIDI mes-
sages. Connect it to the MIDI OUT
connector of the external MIDI device.
OUT/THRU: This connector can be used either as a
MIDI OUT or as a MIDI THRU con-
nector. With the factory settings, it will
function as a MIDI OUT connector,
which means it is set to transmit MIDI
messages.
5. PHONES Jack
An optional set of headphones can be connected here.
The PHONES jack outputs the same sound as the
MONITOR jack.
6. MONITOR Jacks (L, R)
7. AUX A Jacks (L, R)
8. AUX B Jacks (L, R)
9. MASTER OUT Jacks (L,R)
These are output jacks for analog audio signals (RCA
phono type).
With the factory settings, all signals are output from
the MASTER OUT jacks, the output of MONITOR is
the same as that of the MASTER Out, and there is no
output from the AUX (A and B) jacks. The output is
determined by the block settings of the mixer’s master
section and the settings of each channel.
10. FOOT SWITCH Jack
An optional foot switch (such as the DP-2 or the BOSS
FS-5U) can be connected here when you want to con-
trol recorder operations, mark point settings, and
punch in/out operations, and so on with a foot switch.
With the factory settings, a foot switch is set to start
and stop the recorder.
Front and Rear Panels
18
Rear Panel
fig.00-05(rearpanel.eps)
1413 15
1 2 4 5
6
7
8 10
9 11 123
Seitenansicht 17
1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 211 212

Kommentare zu diesen Handbüchern

Keine Kommentare