Roland Vs-880 Bedienungshandbuch PDF herunterladen (Seite 32)

Chapter 2: Understanding Your VS-880

A flashing horizontal bar in the LCD display ([SHIFT] + [DISPLAY]) will indicate

the internal ‘electronic’ position of the control. The entire vertical bar indicates the

current ‘physical’ position.

If your faders or pan controls do not appear to operate, you can either: Move the physical control

from one end to the other to assure that you have crossed the NULL position – or – view the LCD

[DISPLAY] to carefully move the physical control into position to match the electronic position.

Channels vs Tracks

The 8 faders, status buttons, and pan controls on the left side of the VS-880 represent mixer channels. They

may or may not represent actual recorded tracks. However, when a fader is being used for a recorded

track, the channel # and the track # will be the same. Here are the rules for Mixer channels:

•

INPUT>TRACK MODE: Each channel fader represents the corresponding recording track.

i.e. Channel 1 = Track 1, Channel 2 = Track 2, etc.

•

INPUT MIX MODE: Channel faders represent rear panel source inputs 1-4 and Digital Left

and Right, in that order.

•

TRACK MIX MODE: Each channel fader represents the corresponding recording track. i.e.

Channel 1 = Track 1, Channel 2 = Track 2, etc.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 141 142

Keine Kommentare

Roland Vs-880 Bedienungshandbuch Seite 32