Roland Vs-880 Bedienungshandbuch PDF herunterladen (Seite 25)

VS-880 Application Guide

The audio recorded on the Tracks, after the EQ, Fader, and Pan, can be routed to the MIX buss for

monitoring, or to any of the record busses. Routing the Track(s) to a record buss is a simple way to merge

Tracks or record the output of effects devices to a Track.

Remember, each mixer (INPUT Mix & TRACK Mix) retains its own settings when you switch to the

other. The fader level, pan position, and EQ settings that you set up in INPUT MIX mode are

memorized by the VS-880. So, when you switch to TRACK MIX mode and adjust the fader for

channel 1 (for example), the level of Input 1 in INPUT MIX mode is not affected.

Mixer Effect Routing

The internal effects (if the optional VS8F-1 Effects Expansion Board is installed) can be placed in the audio

signal path at any one of three locations.

1. PRE-FADER: The input to the effect is selected from the signal path before the fader. This

means that the fader will have no control over the volume of the audio entering the effect.

The stereo output from the effect is assignable to the MIX buss or the REC (recorder) busses.

2. POST-FADER: The input to the effect is selected from the signal path after the fader. This

means that the fader will control the volume of the audio signal entering the effect. The

stereo output from the effect is assignable to the MIX buss or the REC (recorder) busses.

3. INSERT:The audio signal is routed directly through the effect. i.e. You will only hear the

“effected” signal because the “dry” signal no longer exists. There are four Insert Effect

options: Insert (mono in/mono out), Insert L (processed through the left side of a stereo

effect), Insert R (processed through the right side of a stereo effect), and Insert S (mono in

through the left side of a stereo effect, then in through the right side of the same stereo effect

in series).

Insert Insert L Insert R Insert S

Track 1

Track 2

Track 3

Track 4

Track 5

Track 6

Track 7

Track 8

INPUT 1

INPUT 2

INPUT 3

INPUT 4

Fader 1

Fader 2

Fader 3

Fader 4

Fader 5

Fader 6

Fader 7

Fader 8

Pan 1

Pan 2

Pan 3

Pan 4

Pan 5

Pan 6

Pan 7

Pan 8

MIX buss (MASTER OUT R)

MIX buss (MASTER OUT L)

Input select

Recorder

Mixer

DIGITAL IN L

DIGITAL IN R

EQ and

INSERT

Effect

EQ and

INSERT

Effect

POST -FADER

PRE-FADER

Output assignable to

MIX buss or AUX buss

With "EQ/EffPreIns"

Set to ON

(EQ and effects

are recorded)

With "EQ/EffPreIns"

Set to OFF

(EQ and effects for monitoring, are not recorded)

– OR –

Effect Routin

tions in In

ut>Track Mode

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 141 142

Kommentare zu diesen Handbüchern

Keine Kommentare

Roland Vs-880 Bedienungshandbuch Seite 25

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Mixer Roland Vs-880