Roland Vs-880 Bedienungshandbuch PDF herunterladen (Seite 122)

121

Chapter 7: Advanced Applications and Tips

Sync VS-880 with Computer Sequencer

The VS-880 is a natural partner for a sequencer. There are many ways that the two can work together.

SYNC:

You can use MIDI Time Code, MIDI Machine Control or MIDI Clock to synchronize your computer with

the VS-880. If possible, set aside a port on your MIDI interface for the VS-880 and use a different port for

your other MIDI devices. Connect the MIDI INs and OUTs of the VS-880 to the MIDI Interface as shown in

the diagram below. In this setup, the VS-880 can act as the master or the slave.

To use the VS-880 as the master device sending MIDI Time Code, make sure that MIDI Thru is set to Out

and that the sync source is set to internal. You will also have to set the VS-880 to generate MTC and make

sure that the frame rate matches that of your sequencer (the VS-880 defaults to a frame rate of 30). To

respond, the computer sequencer must be setup to sync to incoming MIDI Time Code.

AUDIO:

Connect the audio outputs of your keyboard to the audio inputs of the VS-880. You can use the INPUT

MIX/TRACK MIX mode to mix the signals of your keyboard with your playback tracks. You can record

fader movements of the VS-880 to the computer sequencer. For mixdown, connect the digital out of the VS-

880 to your DAT machine.

MIDI Interface

1 2 ... 117 118 119 120 121 122 123 124 125 126 127 ... 141 142

Keine Kommentare

Roland Vs-880 Bedienungshandbuch Seite 122