Roland FJ-40 Bedienungsanleitung PDF herunterladen (Seite 78)

4 User's Reference

Default

value

Setting

range

FunctionSubmenu

Top

— mm/INCH mm

This selects millimeters or inches as the unit of measurement for the

width displayed on the top menu after setting up the material. When

inch display is used, values are displayed to the first digit to the right of

the decimal point.

UNIT

— OR-GR/

Lc-Lm

OR-GR

Make this setting when you are using data for six-color printing.

It has no effect on processing data for four-color or eight-color

printing.

The menu is for performing printing using six-color printing data for

older Hi-Fi JET models from Roland DG Corp.

When processing six-color printing data as KCMY + OrGr (black,

cyan, magenta, and yellow plus orange and green, choose [OR-GR].

When processing the six-color printing data as KCMY + LcLm (black,

cyan, magenta, and yellow plus light cyan and light magenta), choose

[Lc-Lm].

* Performing printing using six-color data for an older model requires

taking into account the differences in resolution and the amount of

ink received, and adjusting the output profile appropriately. Note that

the output results will not be exactly equivalent to those obtained

with the older model.

Also, if the FJ-600/500/400 is set to a printing mode that is not

compatible with the older model, correct output results may not be

obtained even when six-color printing data is sent.

The only printing mode on the FJ-600/500/400 that is compatible

with older models is NORMAL.

[OR-GR]: In the six-color data, the two colors other than KCMY

(black, cyan, magenta, and yellow) are processed as OrGr (orange and

green).

[Lc-Lm]: In the six-color data, the two colors other than KCMY (black,

cyan, magenta, and yellow) are processed as LcLm (light cyan and

light magenta).

6COLOR

MODE

SYSTEM

REPORT

— ——This prints the current status of settings and other system information.

— ——

This returns all menu settings to their original values when shipped

from the factory.

For more about the factory defaults for the various settings, see the

"Default value" entry for each menu setting in this section.

FACTORY

DEFAULT

HEAD

SELECT

— TOGGLE/

LEFT/

RIGHT

TOGGLE

* The installed ink type is displayed only in the case of

[PIGMENT 4COLOR] or [DYE 4COLOR].

When the installed ink type is [PIGMENT 4COLOR] or [DYE

4COLOR] and the printing mode is [vNORMAL] or [vSUPER],

printing using only the printing head on one side is performed in

order to improve printing quality.

At this time, select the printing head to use.

When set to [TOGGLE], the printing head used alternates between

the left and right each time the power is turned on. The ink on the left

and right is consumed evenly.

When you send the same data, differences between the printing heads

on the left and right may produce variations in coloring before and

after the power is reset.

When set to [LEFT] or [RIGHT], printing always uses the left or right

printing head.

Because printing results are not affected by differences between the

left and right printing heads, this is suitable for case when you are

outputting the same data a number of times.

— ——INK

REMAINING

This shows the amount of ink left after each of the ink cartridges has

been installed.

The fewer the markers (" "), the less ink is left.

* If a partially used ink cartridge is removed and reinstalled, or if a

partially used ink cartridge is installed, the cartridge is taken to be

unused, and the displayed amount of remaining ink is not true.

For more information, see "3-2 Checking the Remaining Ink Level."

1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 98 99

Kommentare zu diesen Handbüchern

Keine Kommentare

Roland FJ-40 Bedienungsanleitung Seite 78

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Drucken & Scannen Roland FJ-40