Roland VS-880EX Bedienungshandbuch PDF herunterladen (Seite 39)

Chapter 3: Recording Applications

Probably the most common recording you will do is a single instrument or microphone directly to a single

track of the VS-880EX. Our example records a synthesizer as a piano track on the VS-880EX.

You will need to connect your synthesizer to the VS-880EX Input # 1, select Tr. 1-1 for recording, correctly

adjust the volume, then finally record the instrument to Tr. 1-1.

ACTION: Record A Single Piano Track From A

Synthesizer

1. Connect the output of your synthesizer to the VS-880EX - Input #1.

2. Play the keyboard as loud as you will during the performance and turn the [INPUT SENS 1]

knob clockwise until the PEAK light turns red, then turn it slightly counterclockwise until

the red peak LED goes off. (The read peak LED should only come on occasionally during the

loudest point of your performance.)

3. Press the [FADER/EDIT] button until it lights orange.

4. Hold the [STATUS] button 1 and press the [CH EDIT] button 1 until it flashes. This indicates

that input 1 is selected for recording onto track 1.

5. Set the [FADER] on channel 1 to 0dB (the bold line about two-thirds of the way up).

6. Press the [FADER/EDIT] button until it lights green.

7. Press the [STATUS] button 1 until it flashes red. This sets track one to record ready mode.

8. Raise the [FADER] on the channel 1 to listen to the keyboard.

The fader controls what you hear, it will not affect the recording level.

9. Press the [ZERO] button to return the VS-880EX to time location 00:00.

10. Press the [REC] button. The red light will flash.

11. Press the [PLAY] button to begin recording the keyboard track.

Record A Single Piano Track From A Synthesizer

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 145 146

Keine Kommentare

Roland VS-880EX Bedienungshandbuch Seite 39