Roland PK-5A Bedienungsanleitung PDF herunterladen (Seite 10)

PK-5A Operation

●

[11] MIDI CHANNEL

To select a MIDI channel (1~16), press the MIDI

CHANNEL selector [11] (indicator lights).

Use the pedals to enter the MIDI channel you

wish to set. Example: to specify channel “12”,

press [1] and [2]. Then press pedal [B] (ENTER) to

confirm the operation. All indicators briefly

light to confirm your selection.

Note: If you pressed the wrong pedal while specifying

the number, you can cancel your input by pressing

pedal [A] (CANCEL).

Note: To return to the default MIDI channel (“10” in

DRUMS mode), press the MIDI CHANNEL selector [11]

and pedal [C]. All indicators briefly light to confirm your

selection.

Note: If a MIDI channel number higher than “16” is

erroneously selected, the PK-5A will exit this function

when pedal [B] (ENTER) is pressed.

[7] SOUND EFFECTS mode

Press the SOUND EFFECTS selector [7] to select the

mode of the same name. In this mode, the PK-5A

transmits on MIDI channel “16” (and sends PC57,

CC00= 0, CC32= 0 whenever you select it).

After selecting SOUND EFFECTS mode, you can use

the PK-5A’s pedals for triggering sound effects.

In SOUND EFFECTS mode [7], the following func-

tions are available (FUNCTION section):

●

[9] FACTORY SET

After pressing the FACTORY SET selector [9] (the

corresponding indicator lights), 13 note num-

bers can be transmitted for triggering an exter-

nal instrument’s “SFX set”. The note numbers

assigned to the pedals in this way represent the

PK-5A’s factory set. This FACTORY SET cannot

be overwritten.

On most (Roland arranger-type and GM/GM2/

GS) instruments, these assignments correspond

to the following sounds:

●

[10] USER SET

Press the USER SET selector [10] (the corre-

sponding indicator lights), to select a different

SFX set assignment, which is called USER SET.

Unlike the factory set, the USER SET assign-

ments can be changed. The original assign-

ments are as follows:

• Programming the User Set

(1) Connect an external keyboard’s (or the

sequencer’s) MIDI OUT socket to the PK-5A’s

MIDI IN socket.

(2) On the external instrument, set the transmit

channel (TX) to the MIDI channel used by the

PK-5A’s SOUND EFFECTS mode (probably

“16”).

(3) On the PK-5A, select the SOUND EFFECTS [7]

mode.

(4) Press and hold the USER SET selector [10] for

at least two seconds (until its indicator starts

flashing).

(5) While the USER SET indicator is flashing,

press the key on the external keyboard whose

note number you wish to assign to the USER

SET.

Example: to assign the note “C2” (36) to a pedal,

press that key on the external instrument (or

transmit a long C2 with your sequencer).

(6) On the PK-5A, press the pedal you wish to

assign the received note message to.

Pedal MIDI note Sound

0 G5 79 Rain

1 G#5 80 Thunder

2 A#5 82 Seashore

3 B5 83 Stream

4 E3 52 Laughing

5 F3 53 Scream

6 A#3 58 Applause

7 A4 69 Jetplane

8 G#4 68 Train

9 A#4 70 Helicopter

A D4 62 Wind Chimes

B C#5 73 Machine Gun

C D#5 75 Explosion

Pedal MIDI note Sound

0 F#5 78 Birds

1 F#5 78 Dog

2 G3 55 Heartbeat

3 A3 57 Footsteps 2

4 B3 59 Door Creaking

5 C4 60 Door

6 C#4 61 Scratch

7 D#4 63 Car-Engine

8 E4 64 Car-Stop

9 F4 65 Car-Pass

A G4 67 Siren

B C5 72 Gun Shot

C A5 81 Wind

PK-5A book Page 10 Thursday, July 24, 2003 6:26 PM

1 2 ... 5 6 7 8 9 10 11 12 13 14

Kommentare zu diesen Handbüchern

Keine Kommentare

Roland PK-5A Bedienungsanleitung Seite 10

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Musikinstrumente Roland PK-5A