Roland RD-700 Bedienungsanleitung Seite 31

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 52
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 30
31
Eect/Parameter List
Parameter Value Description
Input Sync Sw OFF, ON
Species whether an input note will
cause the sequence to resume from the
rst step of the sequence (ON) or not
(OFF)
Input Sync Thres 0–127
Volume at which an input note will be
detected
Mode LEGATO, SLASH
Sets the manner in which the volume
changes as one step progresses to the
next.
LEGATO: The change in volume from one
steps level to the next remains unaltered.
If the level of a following step is the
same as the one preceding it, there is no
change in volume.
SLASH: The level is momentarily set to
0 before progressing to the level of the
next step. This change in volume occurs
even if the level of the following step is
the same as the preceding step.
Shue 0–127
Timing of volume changes for even-
numbered steps (step 2, step 4, step 6...).
The higher the value, the later the beat
progresses.
Level 0–127 Output Level
21: ROTARY
The Rotary eect simulates the sound of the rotary speakers often used with the
electric organs of the past. Since the movement of the high range and low range
rotors can be set independently, the unique type of modulation characteristic of these
speakers can be simulated quite closely. This eect is most suitable for electric organ
Patches.
Assignable Parameters
MFX Control Speed, Tw Fast Rate, Wf Fast Rate, Separation
Parameter Value Description
Speed SLOW, FAST
Simultaneously switch the rotational
speed of the low frequency rotor and
high frequency rotor.
SLOW: Slows down the rotation to the
Slow Rate.
FAST: Speeds up the rotation to the Fast
Rate.
Wf Slow Rate 0.05–10.00 Hz
Slow speed (SLOW) of the low frequency
rotor
Wf Fast Rate 0.05–10.00 Hz
Fast speed (FAST) of the low frequency
rotor
Woofer Accel 0–15
Adjusts the time it takes the low
frequency rotor to reach the newly
selected speed when switching from fast
to slow (or slow to fast) speed. Lower
values will require longer times.
Wf Level 0–127 Volume of the low frequency rotor
Tw Slow Rate 0.05–10.00 Hz
Settings of the high frequency rotor The
parameters are the same as for the low
frequency rotor
Tw Fast Rate 0.05–10.00 Hz
Tweeter Accel 0–15
Tweeter Level 0–127
Separation 0–127 Spatial dispersion of the sound
Level 0–127 Output Level
22: VK ROTARY
This type provides modied response for the rotary speaker, with the low end boosted
further.
This eect is a descendant of the Roland VK Series’ built-in rotary speaker.
Assignable Parameters
MFX Control Speed, Brake, Tw Fast Rate, Wf Fast Rate
Parameter Value Description
Speed SLOW, FAST Rotational speed of the rotating speaker
Brake OFF, ON
Switches the rotation of the rotary
speaker.
When this is turned on, the rotation will
gradually stop. When it is turned o, the
rotation will gradually resume.
Wf Slow Rate 0.05–10.00 Hz Low-speed rotation speed of the woofer
Wf Fast Rate 0.05–10.00 Hz High-speed rotation speed of the woofer
Wf Trans Up 0–127
Adjusts the rate at which the woofer
rotation speeds up when the rotation is
switched from Slow to Fast.
Wf Trans Down 0–127
Adjusts the rate at which the woofer
rotation speeds up when the rotation is
switched from Fast to Slow.
Wf Level 0–127 Volume of the woofer
Tw Slow Rate 0.05–10.00 Hz
Settings of the tweeter
The parameters are the same as for the
woofer.
Tw Fast Rate 0.05–10.00 Hz
Tw Trans Up 0–127
Tw Trans Down 0–127
Tweeter Level 0–127
Spread 0–10
Sets the rotary speaker stereo image.
The higher the value set, the wider the
sound is spread out.
Low Gain -15–+15 dB Gain of the low range
High Gain -15–+15 dB Gain of the high range
Level 0–127 Output Level
Seitenansicht 30
1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 51 52

Kommentare zu diesen Handbüchern

Keine Kommentare