Roland VS-2480CD Bedienungshandbuch PDF herunterladen (Seite 71)

7—Mixer Views

Roland VS-2480 Owner’s Manual, Version Two Addendum www.RolandUS.com 71

7. MASTER Bus Fader

8. DITHER

Multi-Channel View Input Channels

1. Input Signal Selector

2. PHASE (INV) Button

3. ATT Knob

4. DYNAMICS (DYN) Switch and Overview

5. EQ Switch and Overview

6. AUX Send Sliders

Drag the MASTER bus fader up or down to set the level of the MASTER

bus—this is the same thing as moving the physical MASTER fader on

the VS-2480. The current MASTER bus level is shown beneath the fader.

To activate output dithering, click and hold the DITHER button and

select the desired dithering bit depth.

Click the input signal selector to select the desired

input signal for the channel. Odd-numbered

inputs can be assigned to odd-numbered input

channels, and even-numbered inputs to even-

numbered input channels.

Click the PHASE button so it lights to reverse the

phase polarity of the input channel’s signal.

The ATT knob sets the level of the signal coming

into the channel as shown to the left of the knob.

Turn on the channel’s dynamics processor by clicking the DYN

switch so it lights. The selected type of dynamics processor is shown

beneath the switch along with the current dynamics curve.

Turn on the channel’s EQ by clicking the EQ switch so that it lights.

The current EQ curve appears below the switch.

Set the amount of the channel’s signal sent to an Aux bus by adjusting

the corresponding AUX send slider. With linked Aux busses, a panning

handle replaces the even-numbered Aux bus’s slider (Page 67).

142

366

11.

12.

13.

14.

10.

166

154

153

152

1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 91 92

Kommentare zu diesen Handbüchern

Keine Kommentare

Roland VS-2480CD Bedienungshandbuch Seite 71

Kommentare zu diesen Handbüchern