Roland VS-2480CD Bedienungshandbuch PDF herunterladen (Seite 54)

6—VGA Main Display CH VIEW Screens

54 www.RolandUS.com Roland VS-2480 Owner’s Manual, Version Two Addendum

Channel-Speciﬁc Parameter Strips

At the left side of each CH VIEW screen is a strip that contains parameters speciﬁc to

the selected type of channel.

Input Channel Parameter Strip

1. Channel Name

2. PATCH BAY Selector

3. PHANTOM Switch

4. PHASE Button

5. ATT Knob

6. GROUP Selector

7. CH LINK Button

8. FDRLINK Button

9. AUTOMIX STATUS Button

Click PATCH BAY to reveal a menu from which you

can select the source of the channel’s input signal.

Inputs are always assignable in pairs, with odd-numbered inputs

being assignable to odd-numbered input channels, and so on.

Click PHANTOM—so it’s lit—to turn on the

corresponding XLR input jack’s phantom power.

Click PHASE—so it’s lit—to reverse the phase polarity of the

channel’s signal.

To adjust the level of the input signal coming into the input channel,

drag the ATT knob up or down as desired—the readout beneath the

knob shows the current amount of attenuation.

To assign the input channel to a fader group, click GROUP and

select the desired fader group from the pop-up menu.

To link the channel to its odd/even partner so that any changes

made to one channel affect both, click CH LINK to turn it on.

Click FDRLINK—so it’s lit—to link the current channel’s fader to its

odd/even partner so their levels can be set by moving either fader

while their other parameters remain independently controllable.

Click the AUTOMIX STATUS button to set the channel’s status

when Automix is turned on.

166

130

154

153

155

152

155

327

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 91 92

Keine Kommentare

Roland VS-2480CD Bedienungshandbuch Seite 54