Roland VS-2480CD Bedienungshandbuch PDF herunterladen (Seite 19)

Roland VS-2480 Owner’s Manual, Version Two Addendum www.RolandUS.com 19

3—Version Two VGA Overview

The Main Display and the Info Display

Whenever an external VGA monitor is connected, the VS-2480 provides a main display

and an Info Display. The:

• main display—is where you work. You can interact with the main display using your

mouse, keyboard and the VS-2480’s top-panel controls. All messages appear here.

• Info Display—is a non-interactive screen that provides helpful supplemental

information. Page 21 describes how to determine the contents of the Info Display.

You can select the VGA display or the LCD display as the main display, but not both at

the same time. When you select the main display—by setting the OPERATION

TARGET parameter—the other display is automatically designated as the Info Display.

Setting the Operation Target

•You can toggle between the two OPERATION TARGET settings—VGA or LCD—by

holding down SHIFT and pressing the UTILITY button. Each time you reset the

OPERATION TARGET, the previously selected main display conﬁrms the change.

•You can manually set the OPERATION TARGET parameter as described below.

Manually Setting the OPERATION TARGET Parameter

1. Press UTILITY.

2. If “SYSTEM” isn’t visible above F1, press PAGE until it is.

3. Press F1 (SYSTEM).

4. Press F2 (Param2) and locate the OPERATION TARGET parameter.

5. Set OPERATION TARGET to VGA or LCD. On the main display, the VS-2480 asks:

6. Press ENTER/YES to proceed, or EXIT/NO to cancel the change.

About the Main Display

The LCD as Main Display

When the LCD is designated as the main display, it behaves as described in the VS-2480

Owner’s Manual, starting on Page 70.

The VS-2480 displays the currently selected operation target when it powers up.

The internal LCD shows: The external VGA shows:

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 91 92

Keine Kommentare

Roland VS-2480CD Bedienungshandbuch Seite 19