Roland PNC-950 Bedienungsanleitung PDF herunterladen (Seite 9)

3

3 PART NAMES AND FUNCTIONS

DIP Switches

Used to make various settings.

Pen Force Control Slider

Sets the blade force to be used with the tool.

Parallel (Centronics) Input Connector

In a parallel configuration, this connector is

where you need to connect the parallel cable in

order to communicate with your computer.

Serial (RS-232C) Input

Connector

In a serial configuration, this

connector is where you need to

connect the serial cable that is

used to communicate with your

computer.

Tool Carriage

The tool carriage is where the

blade holder (or pen) is mounted.

The tool carriage performs the

cutting by moving the tool left/

right or up/down.

• Front View

Movable Pinch Roller

(Left)

This presses the media against

the grit roller. When loading a

sheet, place the left roller

inside the left edge of the sheet

to correctly track the material

through the machine.

Power Switch

ON when switched to [I].

OFF when switched to [O].

Sheet Loading Lever

Used to raise or lower the pinch

rollers when loading or unloading a

sheet.

Power Connector (AC IN)

This connector accepts standard AC

power cord.

• Rear View

Operation Panel

Movable Pinch Roller (Right)

This presses the media against the grit roller.

When loading a sheet, place the right roller

inside the right edge of the sheet to correctly

track the material through the machine.

Platen

The sheet is moved over the

platen during the cutting process.

Grit Roller

Grasps and moves the sheet

during cutting.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 35 36

Kommentare zu diesen Handbüchern

Keine Kommentare