Roland XP-60 Betriebsanleitung Seite 201
- Seite / 226
- Inhaltsverzeichnis
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
4. Data transmission (Sequencer section)
4.1 Recorded messages are transmitted during
playback.
4.2 If the Through parameter (SEQUENCER/Setup/
SEQ System Setup) is ON, messages received
(except for System Common messages and
System Realtime messages) will be transmitted.
4.3 Messages that are generated and transmitted
4.3.1 Messages automatically generated by the
system
■ Channel Mode messages
● Omni Off (Controller number 124)
status 2nd byte 3rd byte
BnH 7CH 00H
n=MIDI channel number : 0H - FH (ch.1 - ch.16)
* At start-up, this message is transmitted to all channels.
● Poly (Controller number 127)
status 2nd byte 3rd byte
BnH 7FH 00H
n=MIDI channel number : 0H - FH (ch.1 - ch.16)
* At start-up, this message is transmitted to all channels.
4.3.2 Messages generated and transmitted when
the Sync Output switch is ON
■ System Common messages
● Song Position Pointer
status 2nd byte 3rd byte
F2H mmH llH
mm,ll=value: 00 00H - 7F 7FH (0 - 16383)
● Song Select
status 2nd byte
F3H ssH
ss=value : 0 - 7FH (0 - 127)
■ System Realtime messages
● Timing Clock
status
F8H
● Start
status
FAH
● Continue
status
FBH
● Stop
status
FCH
4.3.3 Messages generated and transmitted when
the MMC Output switch is ON
● STOP (MCS)
status data byte status
F0H 7FH, dev, 06H, 01H F7H
Byte
Remarks
F0H Exclusive status
7FH Universal System Exclusive Realtime Header
7FH Device ID
06H MMC Command Message
01H STOP(MCS)
F7H EOX (End Of Exclusive)
● DEFERRED PLAY (MCS)
status data byte status
F0H 7FH, dev, 06H, 03H F7H
Byte
Remarks
F0H Exclusive status
7FH Universal System Exclusive Realtime Header
7FH Device ID
06H MMC Command Message
03H DEFERRED PLAY(MCS)
F7H EOX (End Of Exclusive)
● LOCATE (MCP)
FORMAT2 - LOCATE[TARGET]
status data byte status
F0H 7FH, dev, 06H, 44H, 06H, 01H, hrH, mnH, scH, frH, ffH F7H
Byte
Remarks
F0H Exclusive status
7FH Universal System Exclusive Realtime Header
7FH Device ID
06H MMC Command Message
44H LOCATE[TARGET]
06H Byte count
01H “TARGET” sub-Command
hrH Standard Time Specification with subframes (type{ff})
mnH
scH
frH
ffH
F7H EOX (End Of Exclusive)
5. Parameter address map
1. XP-60/XP-80 (Model ID=6AH)
Note: For addresses marked by a #, the data must be divided into 2 parts
for transmission. For example, data with the hexadecimal value ABH
would be divided into 0AH and 0BH, and transmitted in that order.
Note: Parameter values enclosed in < > are for the JV-1080, and will be
ignored if received by the XP-60/XP-80.
+-----------------------------------------------------------------------------+
| Start | |
| Address | Description |
|-------------+---------------------------------------------------------------|
| 00 00 00 00 | System 1-1 |
| 01 00 00 00 | Temporary Performance 1-2 |
| 02 00 00 00 | Performance Mode Temporary Patch (part 1) 1-3 |
| 02 01 00 00 | Performance Mode Temporary Patch (part 2) |
| : | : |
| 02 08 00 00 | Performance Mode Temporary Patch (part 9) |
| 02 09 00 00 | Temporary Rhythm Setup 1-4 |
| 02 0A 00 00 | Performance Mode Temporary Patch (part 11) 1-3 |
| : | : |
| 02 0F 00 00 | Performance Mode Temporary Patch (part 16) |
| 03 00 00 00 | Patch Mode Temporary Patch 1-3 |
| 10 00 00 00 | User Performance USER:01 1-2 |
| 10 01 00 00 | User Performance USER:02 |
| : | : |
| 10 1F 00 00 | User Performance USER:32 |
| 10 40 00 00 | User Rhythm Setup USER:1 1-4 |
| 10 41 00 00 | User Rhythm Setup USER:2 |
| 11 00 00 00 | User Patch USER:001 1-3 |
| 11 01 00 00 | User Patch USER:002 |
| : | : |
| 11 7F 00 00 | User Patch USER:128 |
+-----------------------------------------------------------------------------+
1-1.System
+-----------------------------------------------------------------------------+
| Offset | |
| Address | Description |
|-------------+---------------------------------------------------------------|
| 00 00 | System Common 1-1-1 |
| 10 00 | Part 1 Scale Tune 1-1-2 |
| 11 00 | Part 2 Scale Tune |
| : | : |
| 1F 00 | Part 16 Scale Tune |
| 20 00 | Patch Mode Scale Tune 1-1-2 |
+-----------------------------------------------------------------------------+
221
Capítulo 12. Material suplementario
- MANUAL DEL USUARIO 1
- IMPORTANT SAFETY INSTRUCTIONS 2
- SAVE THESE INSTRUCTIONS 2
- Apparatus containing 3
- Lithium batteries 3
- AAVVIISOO 4
- NOTAS IMPORTANTES 5
- Protect tab 6
- Write (writing permitted) 6
- Protect (writing prohibited) 6
- Prestaciones del XP-60/XP-80 7
- Resumen de Capítulos 8
- Contenido 9
- Panel Frontal 15
- I.Sección SEQUENCER 16
- Panel Laterall 17
- Panel Posterior 18
- Configuración Básica 19
- Performances 20
- Sets de Percusión 20
- Funcionamiento Básico 21
- Desplazar el cursor 24
- Modificar un valor 24
- Asignar un nombre 25
- Capítulo 2. Interpretar 27
- Interpretar en el modo 30
- Performance 30
- Asignar un Patch a una Parte 33
- (Paleta de Sonidos) 33
- Set de Percusión 34
- Hacer Sonar un arpegio 36
- Grabar un arpegio 38
- Desplazamiento de Octava) 38
- Transportar) 39
- Acerca de los efectos 40
- Editar un Patch 41
- Acerca de la edición de Tones 43
- Editar un Performance 44
- Editar un Set de Percusión 45
- Guardar un Sonido editado 46
- Pantalla Common General 47
- Pantalla Common Control 48
- Pantalla Structure 50
- Tiempo Delay 52
- Tiempo de 52
- Pantalla Pitch 53
- Pantalla Pitch Envelope 54
- Pantalla TVF Envelope 55
- Pantalla TVA Envelope 57
- Fuente de Control 59
- Aftertouch 59
- Pantalla Control Switch 60
- Pantalla EFX Param 64
- Pantalla EFX Control 64
- Pantalla Chorus 65
- Pantalla Reverb 65
- (Common) 66
- [PERFORM]➞[F1] (Common) 66
- [PERFORM]➞[F4] (MIDI) 68
- [PERFORM]➞[F5] (Effects) 69
- [PERFORM]➞[F6] (Info) 70
- Pantalla Ryhthm Set Name 71
- Pantalla Wave 71
- [RHYTHM]➞[F3] (Key TVF) 72
- Bend Range (Gama del Bender) 73
- Mute Group (Enmudecer Grupo) 73
- Percusión (Effects) 74
- [RHYTHM]➞[F5] (Key Ctl) 74
- ELos tipos de efectos EFX 75
- 4: PHASER 76
- 5: SPECTRUM 76
- 6: ENHANCER 76
- 7: AUTO-WAH 77
- 8: ROTARY 77
- 9: COMPRESSOR 77
- 10: LIMITER 78
- 11: HEXA-CHORUS 78
- 12: TREMOLO-CHORUS 78
- 13: SPACE-D 79
- 14: STEREO-CHORUS 79
- 15: STEREO-FLANGER 79
- 16: STEP-FLANGER 80
- 17: STEREO-DELAY 80
- 18: MODULATION-DELAY 81
- 19: TRIPLE-TAP-DELAY 82
- 20: QUADRUPLE-TAP-DELAY 82
- 21: TIME-CONTROL-DELAY 83
- 22: 2VOICE-PITCH-SHIFTER 83
- 24: REVERB 84
- 25: GATE-REVERB 85
- 26: OVERDRIVE ➞ CHORUS 85
- 27: OVERDRIVE ➞ FLANGER 85
- 28: OVERDRIVE ➞ DELAY 86
- 29: DISTORTION ➞ CHORUS 86
- 30: DISTORTION ➞ FLANGER 86
- 31: DISTORTION ➞ DELAY 86
- 32: ENHANCER ➞ CHORUS 86
- 33: ENHANCER ➞ FLANGER 87
- 34: ENHANCER ➞ DELAY 87
- 35: CHORUS ➞ DELAY 87
- 36: FLANGER ➞ DELAY 88
- 37: CHORUS ➞ FLANGER 88
- Configuración del Entorno de 89
- Operaciones del XP-80 89
- Ajustar la Afinación (Tune) 90
- [SYSTEM]➞[F2] (Tune) 90
- Ajustes MIDI (MIDI) 91
- [SYSTEM]➞[F3] (MIDI) 91
- [SYSTEM]➞[F4] (Control) 93
- [SYSTEM]➞[F5] (Arpeg) 94
- XP-80 (Info) 96
- [SYSTEM]➞[F6] (Info) 96
- Acerca del secuenciador 97
- Reproducir una canción 98
- Reserve 1 100
- Reserve 2 100
- Reserve 3 100
- Reproducir un Patrón 102
- Antes de grabar 105
- Ajustar el tipo de compás 106
- Grabar cambios de tempo 111
- Entrar Notas y silencios 114
- Pattern name 115
- Pattern beat 115
- Length of measure in Pattern 115
- Note Gate time 115
- Nota Tiempo de Puerta 115
- Suprimir la grabación (Undo) 116
- Guardar sólo la canción 117
- Archivo MIDI Estándar 117
- Configuración del entorno de 118
- Measure number 119
- Número del Compás 119
- La Función Locate 120
- Ajustar el bucle 121
- [SEQUENCER]➞[F5] (Loop) 121
- Acerca de Track Edit 122
- [SEQUENCER]➞[F3] (TrkEdit) 122
- Ajustar el área de la edición 123
- Target track 124
- Pista Destino 124
- Copiar una Frase - 3 Copy 125
- Meas (Insert Measure) 127
- (Modificar la Velocidad) 128
- (Change MIDI channel) 129
- Gate Time (Change gate time) 130
- 9 Merge 131
- Pista Fuente Pista Destino 132
- Truncate 136
- Acerca de la cuantificación 137
- [SEQUENCER]➞[F2] (Quantiz) 137
- La cuantificación Grid 138
- La Cuantificación Shuffle 139
- La Cuantificación Groove 140
- Volume label 143
- Ver la pantalla Microscope 145
- [SEQUENCER]➞[F4] (Micro) 145
- Borrar datos de performance 150
- Mover datos de secuenciador 150
- Copiar datos de secuenciador 150
- Tocar utilizando RPS 152
- Volume labelPlay mode 154
- Step number 154
- Chain play 155
- Acerca del Modo Utilidades 156
- Guardar datos de sonido en la 157
- Copiar un Performance 158
- [UTILITY]➞[2]➞[ENTER] 158
- Patch copy (Copiar un Patch) 159
- La función Patch Inicialize 161
- [UTILITY]➞[3]➞[ENTER] 161
- [UTILITY]➞[4]➞[ENTER] 162
- Int (Song Inicialize) 165
- [UTILITY]➞[8]➞[ENTER] 166
- Acerca del modo Disk 167
- Cargar en el XP-80 un archivo 168
- [DISK]➞[2]➞[ENTER] 169
- [DISK]➞[3]➞[ENTER] 170
- [DISK]➞[4]/[5]/[6]➞[ENTER] 171
- 7 Delete (Delete file) 172
- - 8 Rename 172
- [DISK]➞[9]➞[ENTER] 173
- Entrar en el modo GM 174
- Ajustar la Parte (Part) 175
- Parte (Info) 176
- [SHIFT]+[PERFORM]➞[F6] (Info) 176
- Funciones útiles del modo GM 177
- (GM Utility) 177
- Patches 179
- OUTPUTLEVEL 181
- CLICK OUT 181
- Cambiar de Patch 182
- Cambiar de Performance 182
- Cambiar de Set de Percusión 182
- Ajustar los parámetros 185
- MIDI OUT 186
- MIDI OUTMIDI IN 186
- Grabar en el XP-80 187
- Solucionar Pequeños Problemas 188
- Mensajes de Error 189
- Lista de Sets de Percusión 191
- Lista de Performances 192
- Lista de estilos de arpegio 193
- MIDI implementation 194
- ■ Channel Mode messages 196
- ■ System Realtime messages 197
- ■ System Exclusive messages 197
- ■ Channel Voice messages 198
- ■ Channel voice messages 199
- 1-1-1.System Common 202
- 1-1-2.Scale Tune 202
- 1-2.Performance 202
- 1-2-1.Performance Common 203
- 1-2-2.Performance Part 203
- 1-3.Patch 203
- 1-3-1.Patch Common 203
- 1-3-2.Patch Tone 204
- 1-4.Rhythm Setup 205
- 1-4-1.Rhythm Common 205
- 1-4-2.Rhythm Note 205
- 6. Supplementary material 206
- Thus, the address is: 207
- 00 00H Patch Common 208
- MIDI Implementation Chart 209
- Especificaciones 211
- Modo Patch [PATCH] 212
- Modo Performance [PERFORM] 213
- Pantalla 214
- Modo GM [SHIFT] + [PERFORM] 215
- Modo Secuenciador [SEQUENCER] 216
- Al pulsar [LOCATE] 217
- Al pulsar [REC] 217
- Al pulsar [F6] (List) 217
- Modo Chain Play [CHAIN PLAY] 218
- Modo Sistema [SYSTEM] 218
- Utility mode [UTILITY] 219
- Modo Disk [DISK] 220
- Information 226
Verwandte Produkte und Handbücher für Musikinstrumente Roland XP-60
Musikinstrumente Roland KR7/5 Bedienungsanleitung
(200 Seiten)
(200 Seiten)
Musikinstrumente Roland GKP-4 Bedienungshandbuch
(10 Seiten)
(10 Seiten)
Musikinstrumente Roland FR-2b Bedienungshandbuch
(32 Seiten)
(32 Seiten)
Musikinstrumente Roland DP-990 Bedienungsanleitung
(108 Seiten)
(108 Seiten)
Musikinstrumente Roland XP-60 Bedienungshandbuch
(248 Seiten)
(248 Seiten)
Musikinstrumente Roland RS-70 Bedienungsanleitung
(178 Seiten)
(178 Seiten)
Musikinstrumente Roland HP 557R Bedienungsanleitung
(140 Seiten)
(140 Seiten)
© 2020, manymanuals.de. Alle Rechte vorbehalten. | 0.052 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern