Roland PC-300 Bedienungsanleitung Seite 12

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 128
  • Inhaltsverzeichnis
  • FEHLERBEHEBUNG
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 11
Computer connected via the USB port
1.
Connect the PC-300s USB port to a free USB port on your computer.
2.
Set the PC-300s KEYBOARD/PC switch to PC.
Powering up
1.
Power to the various devices should be turned on in the appropriate order:
First, switch on the units from which MIDI messages will originate (here, the PC-300).
The PC-300s POWER indicator lights.
Note: If the PC-300 is powered using the ACA series adapter, set the POWER switch to the ON
(DC IN)position. If it is connected to a USB port, set the POWER switch to the ON (USB)
position. In that case, there is no need for the adapter.
Next, switch on the sound module, then the audio reproduction equipment.
2.
Power off your system in the reverse order.
Note: This unit is equipped with a circuitry protection feature. A brief interval after power up is
required before the unit will operate normally.
Select "PC"
To a USB port of
your computer
MIDI IN
connector
COMPUTER switch
(set to MIDI)
PC-300
Sound module
Computer
MIDI OUT
connector
USB connector
USB connector
10
PC-300
Seitenansicht 11
1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 127 128

Kommentare zu diesen Handbüchern

Keine Kommentare