Roland HP 555G Spezifikationen PDF herunterladen (Seite 10)

HP-535 Nov. 1998

6. Serial interface check

The following display will appear.

⋅

MIDI operation check

Set the computer switch to the MIDI position. " £" symbol will be displayed at the left of "MI" in the LCD. Using a MIDI cable, connect

the MIDI IN located under the keyboard to the MIDI OUT located at the back of the piano. If the test result is OK, the LCD will indicate

"OK" as follows.

Using a MIDI cable, connect the MIDI IN located at the back of the piano to MIDI OUT.

If the test result is OK, the LCD will indicate "OK" as follows.

⋅

Computer interface operation check

(1) Mac: Settings for connection to a Macintosh.

Set the computer switch to Mac. An underline will be displayed below Mc in the LCD.

Connect a computer test cable (part no. 17049906) to the Computer connector under the keyboard.

Check both ends of the white conductor (signal) and black conductor (ground) of the test cable by oscilloscope, and confirm that a 1

MHz clock is present.

Now turn on the switch of the computer test cable. If the result is normal, the OK will appear in the LCD as follows.

Turn off the switch of the test cable.

If the result is OK, the following display will appear in the LCD.

(2) PC1: Settings for connection to a PC-9800.

Set the computer switch to PC1. An underline will be displayed below P1 in the LCD.

Connect a computer test cable (part no. 17049906) to the Computer connector under the keyboard, and turn on the switch of the

computer test cable. If the result is OK, the following display will appear.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 31 32

Keine Kommentare

Roland HP 555G Spezifikationen Seite 10