Roland VE-7000 Bedienungshandbuch PDF herunterladen (Seite 14)

Make connections

Connect the necessary devices as shown in the following diagram.

fig.connect

Use a MIDI cable to connect the VE-7000's MIDI OUT to the MIDI IN of the

device (e.g., VM Console) that you wish to control from the VE-7000.

If you wish to use the VE-7000 to control another device, such as an

additional VM Console, connect the device to the MIDI IN of the VE-7000.

MIDI messages that are input to the VE-7000's MIDI IN will be re-

transmitted without change from MIDI OUT, and sent to the MIDI IN of the

VM Console or other device being controlled by the VE-7000.

Placing the VE-7000 on the VM Console

If you are using the VE-7000 with a “VM-C7200” VM Console, place it at the

left of the display area. The rubber magnet on the bottom of the unit will

hold it in place.

Since you will need to view the display area of the VM Console (or other

device) being controlled as you operate the VE-7000, we recommend that

you place it as close to the display area as possible.

VE-7000 VM-C7200

MIDI OUT

MIDI IN

MIDI OUT

MIDI IN

INPUT SENS

MASTER

PHONESMIXER MODE

HD Recorder

To prevent malfunction

and/or damage to speakers

or other devices, always

turn down the volume, and

turn off the power on all

devices before making any

connections.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 33 34

Keine Kommentare

Roland VE-7000 Bedienungshandbuch Seite 14