Roland FJ-42 Bedienungsanleitung PDF herunterladen (Seite 45)

3 Maintenance

3-5 How to Replace the Separating Knife

If the separating knife, replace it with the replacement blade included with the FJ-52/42.

Do not touch the tip of the

separating knife with your fingers.

Doing so may result in injury.

Make sure the power to the unit is

off before attempting to replace the

separating knife.

Doing so may result in injury.

Press the [POWER] key to switch off the power.

Turn off the main power switch.

The POWER LED goes out

Remove the separating knife.

(1) Loosen the screw until it slips out.

(2) Grasp the screw portion, and slowly pull it out in

the direction of the arrow.

* Do not pull back while doing this.

Replace with a new knife.

If the blade remains in the carriage, use commercially

available tweezers to remove it.

Install the separating knife.

(1) Grasp the screw portion and slowly insert it into

the groove.

* Take care to ensure that the knife does not slip

(2) Tighten the screw.

(2)

(1)

Positioning groove

The knife is secured in

place by the magnet.

(2)

(1)

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 68 69

Keine Kommentare

Roland FJ-42 Bedienungsanleitung Seite 45