Roland Vs-880 Betriebsanleitung Seite 107
- Seite / 154
- Inhaltsverzeichnis
- FEHLERBEHEBUNG
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
EFFECT 1 Send (Effect 1 send level)
Specify the volume level (0Ð127) of the signal that is sent to the EFFECT 1 buss. The default setting
is 100.
9. Press PARAMETER [ ].
The display will indicate ÒCH1 EFFECT1 Pan=Ó.
10.Adjust the panning of the signal that will be input to effect 1. Rotate the TIME/VALUE dial.
EFFECT 1 Pan (Effect 1 pan)
For channels on which Channel Link is ÒOff,Ó this sets the panning (L63Ð0ÐR63) of the stereo signal
which is output to the EFFECT 1 buss. ÒL63Ó is far left, and ÒR63Ó is far right.
For channels on which Channel Link is ÒOn,Ó this sets the left/right volume balance (L63Ð0ÐR63)
of the stereo signal from the paired channels which is output to the EFFECT 1 buss.
The default value is Ò0Ó (center).
11.Repeat steps 2–10 to make settings for channels 2–6 in the same way.
12.Press channel 7 [CH EDIT].
13.Hold down [SHIFT] and press channel 1 [EFFECT-1(Input/BUSS)].
14.Rotate the TIME/VALUE dial. For this example, select “MIX-L” so that the signal of the MIX bus
will be recorded.
Input (input select)
This selects the input source of each channel. If Channel Link is on, stereo sources can be selected.
When Channel Link is off: INPUT 1Ð4, DIGITAL-L, DIGITAL-R, MIX-L, MIX-R, AUX-A,
AUX-B
When Channel Link is on: INPUT-12, INPUT 34, DIGITAL, MIX, AUX-AB
15.Press channel 8 [CH EDIT].
16.Repeat steps 13, 14 to make settings for channel 8 in the same way. However in step 16,
select “MIX-R” so that the R side of the MIX buss will be recorded.
17.Press [EDIT(SOLO)] several times until “MST EFF1 RTN to=” appears.
18.Rotate the TIME/VALUE dial. For this example, select “MIX”.
EFF1 RTN to (Effect 1 return to)
Select the output destination of effect 1. The busses that can be selected will depend on the current
mixer mode.
When in INPUT➝TRACK mode
MIX:
the MIX buss (stereo)
AUX: the AUX buss (stereo)
19.Press PARAMETER [ ].
The display will indicate ÒEFF1 RTN Lev=Ó.
20.Adjust the output level of effect 1. Rotate the TIME/VALUE dial.
EFF1 RTN Lev (Effect 1 return level)
Set the output level (0Ð127) of effect 1.
CONDITION MARKER#
MASTER
INPUT TRACK
AUX
TIMETIME
48
24
4
0
dB
1122
Chapter 8 Using the internal effects
107
Chapter 8
- 1/ 2 / 3 / 4 / CLEAR 1
- IMPORTANT SAFETY INSTRUCTIONS 2
- SAVE THESE INSTRUCTIONS 2
- Introduction 4
- Contents 6
- Main features 10
- Important notes 11
- Concerning copyright 12
- Disclaimer of liability 12
- Additional Precautions 12
- Front and rear panels 13
- Recorder section 14
- Display section 15
- Rear panel 16
- Mixer-related 17
- A.Mix Mode (Auto mix mode) 18
- Playing back the auto mix 19
- Erasing the auto mix 19
- INPUT MIX/TRACK MIX 20
- Using the 3-band equalizer 21
- Recorder related functions 22
- Effect related 23
- ● Space Chorus 24
- ● Lo-Fi Processor 25
- ● 4-Band Parametric Equalizer 26
- ● 10-Band Graphic Equalizer 27
- ● Hum Canceler 28
- ● Vocal Canceller 28
- ● Vocoder 2 29
- ● Voice Transformer 30
- REV (Reverb) 31
- FE (Fader edit) 31
- MID (MIDI control) 31
- ● Mic Simulator 32
- ■ Inserting an effect 34
- Inserting in stereo 36
- Inserting to the master out 36
- Display related 37
- Disk drive related 38
- To stop during the procedure 39
- Synchronization related 40
- CV (Convert) 41
- Gen (Sync generator) 41
- ■ Using the tempo map 42
- MIDI related 43
- ■ Using the numeric keys 44
- ([NUMERICS]) 44
- (Shift Lock) 44
- ■ Easy time adjustment 45
- Sources, tracks, and channels 46
- Workstation) 46
- Signal flow (busses) 46
- Mixer section 48
- 2 31 4 L R 49
- 1 2 3 4 5 6 7 8 49
- ■ Switching the mixer mode 51
- Recalling a scene 52
- Effects section 54
- VS-880 operation 54
- ■ Selecting parameters 55
- ■ Executing an operation 55
- ■ Changing the current time 56
- ■ Storing a time location 57
- CONDITION MARKER# 58
- ■ Marking a time location 59
- ■ Clearing a mark 60
- Before you begin 61
- Listening to the demo song 61
- Making a new recording 62
- General procedure for multi 63
- ■ Recording additional tracks 64
- (Punch-in/out) 64
- Recording procedure 65
- ■ Combining the performances 67
- ■ Creating a master tape 67
- EQ Switch (equalizer switch) 68
- EQL (equalizer low) 68
- EQM (equalizer middle) 68
- EQH (equalizer high) 68
- Applying effects (Loop) 69
- Each channel settings 70
- Master block settings 71
- Digital recording 72
- MasterClk (Master clock) 73
- VariPitch 73
- Before you finish operations 74
- Re-starting the VS-880 75
- What is editing? 76
- Finding a desired location 76
- (Preview) 76
- Basic procedure 77
- Re-using part of the perfor 78
- Modifying the organization 79
- Erasing part of a performance 81
- Exchanging performance data 81
- Inserting blank space into a 82
- Deleting a portion of a 83
- Modifying the playback 84
- (Time compression/expansion) 84
- About MIDI 85
- ■ Using MTC 86
- MTC Type 87
- Source (Sync source) 88
- ErrLevel (Error level) 88
- Creating a tempo map 90
- Synchronized operation 90
- ■ Using the sync track 91
- When you experience prob 92
- Saving performance data 94
- ■ When the data cannot be 95
- If you have problems saving 96
- Saving performance data to 97
- Loading performance data 98
- MIX Sw (mix switch) 100
- EFFECT 1 (Effect 1 switch) 100
- EFFECT 1 Pan (Effect 1 pan) 101
- EFF1 Bal (Effect 1 balance) 101
- BUSS Sw (buss switch) 102
- BUSS Sel (buss select) 102
- EFFECT1 (Effect 1 switch) 103
- Input (input select) 107
- Sounding the metronome 109
- Using a foot switch to play 110
- Stopping automatically 110
- (Marker stop) 110
- Changing the pitch during 111
- Listening only to a specific 111
- Simultaneously adjusting a 112
- Undoing a recording or 112
- When the disk has little 113
- Switching the contents of 114
- Displaying measures/beats 115
- Checking the size of a 115
- Restoring the mixer settings 116
- If there is no internal hard 116
- Collecting just the sections 118
- Copying an 8-track MTR 119
- Controlling the mixer from a 120
- MIDI sequencer 120
- Preparations 121
- Recording mixer operations 121
- Performing a compu-mix 121
- DeviceID (Device ID) 122
- MIDIThr (MIDI thru switch) 122
- Settings for the slave VS-880 124
- MMC-compatible device 125
- ■ If you have problems with 126
- Using external effect units 127
- Appendices 129
- Connecting a disk drive 130
- ■ SCSI ID numbers 131
- ■ Partitions 131
- Troubleshooting 132
- ■ Disk drive problems 133
- ■ Synchronization problems 133
- (does not synchronize) 133
- ■ Other problems 133
- Error messages 134
- Special key operations 136
- Parameter list 138
- TRACK MIX Mode 139
- ■ System Parameters 140
- Sync/Tempo 141
- Sync Track Convert 141
- MIDI Implementation Chart 143
- Mixer section block diagram 144
- Glossary 145
- Specifications 146
- About the V-XPANDED sticker 147
- ■ Special key operations 148
- ■ Track sheet 152
- CLASSE B 153
- Information 154
Verwandte Produkte und Handbücher für Mixer Roland Vs-880
Mixer Roland V-1600HD Bedienungshandbuch
(68 Seiten)
(68 Seiten)
Mixer Roland CPM-300 Bedienungsanleitung
(26 Seiten)
(26 Seiten)
Mixer Roland SP-202 Bedienungsanleitung
(47 Seiten)
(47 Seiten)
Mixer Roland SRQ-4015 Bedienungsanleitung
(48 Seiten)
(48 Seiten)
Mixer Roland M-480 Bedienungsanleitung
(2 Seiten)
(2 Seiten)
Mixer Roland V-1600HD Bedienungsanleitung
(8 Seiten)
(8 Seiten)
Mixer Roland M-480 Bedienungshandbuch
(17 Seiten)
(17 Seiten)
Mixer Roland M-1000 Bedienungsanleitung
(26 Seiten)
(26 Seiten)
Mixer Roland V-4EX Bedienungshandbuch
(64 Seiten)
(64 Seiten)
Mixer Roland V-4 Bedienungsanleitung
(4 Seiten)
(4 Seiten)
Mixer Roland SRQ-4015 Bedienungsanleitung
(1 Seiten)
(1 Seiten)
Mixer Roland SRQ-4015 Bedienungsanleitung
(8 Seiten)
(8 Seiten)
© 2020, manymanuals.de. Alle Rechte vorbehalten. | 0.450 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern