Roland BR-800 Bedienungshandbuch PDF herunterladen (Seite 85)

EditingMasteringUsing USBConvenient

Functions

Appendixes Quick StartGetting Ready

to Record

Recording/

Playback

Using

Effects

Using

Rhythm

85

Adding a Sense of Spaciousness

This effect adds reverberation to the sound.

*1 Setting available when TYPE is set to SPRING.

*1 Setting available when TYPE is set to CHORUS.

*2 Setting available when TYPE is set to DELAY.

Parameter List

REVERB

Parameter/

Range

Explanation

TYPE

Select the type of reverb.

Various different simulations of space are offered.

AMBIENCE

Simulates an ambience microphone (off-mic,

placed at a distance from the sound source)

used in recording and other applications.

Rather than emphasizing the reverberation,

this reverb is used to produce a sense of

openness and depth.

ROOM

Simulates the reverberation in a small

room. Provides warm reverberations.

HALL 1

Simulates the reverberation in a concert

hall. Provides clear and spacious reverber-

ations.

HALL 2

Simulates the reverberation in a concert

hall. Provides mild reverberations.

PLATE

Simulates plate reverberation (a reverb unit

that uses the vibration of a metallic plate).

Provides a metallic sound with a distinct

upper range.

SPRING

This simulates the sound of a guitar amp’s

built-in spring reverb.

MODULATE

This reverb adds the wavering sound

found in hall reverb to provide an extreme-

ly pleasant reverb sound.

REV TIME (Reverb Time)

0.1s–10.0s

Adjusts the length (time) of reverberation.

PRE DELAY

0ms–500ms

Adjusts the time until the reverb sound ap-

pears.

LOW CUT (Low Cut Filter)

FLAT,

55Hz–800Hz

This sets the frequency at which the low cut

filter begins to take effect. When “FLAT” is

selected, the low cut filter will have no ef-

fect.

HIGH CUT (High Cut Filter)

700Hz–11kHz,

FLAT

This sets the frequency at which the high

cut filter begins to take effect. When

“FLAT” is selected, the high cut filter will

have no effect.

DENSITY

0–10

Adjusts the density of the reverb sound.

E.LEVEL (Effect Level)

0–100

Adjusts the volume of the reverb sound.

SPRG SENS (Spring Sensitivity) *1

0–100

Adjusts the sensitivity of the spring reverb

effect. When the value is set higher, the ef-

fect is obtained even with a weak picking.

CHORUS/DELAY

Parameter/

Range

Explanation

TYPE

Select the type of effect.

CHORUS

A sound with a subtly shifted pitch is add-

ed to the direct sound, making the final out-

put sound thicker and broader.

DELAY

This creates a thicker sound by applying a

delayed sound to the direct sound.

RATE *1

0 – 100

Adjusts the rate of the Chorus effect.

DEPTH *1

0 – 100

Adjusts the depth of the Chorus effect.

PRE DLY (Pre Delay) *1

0.5 – 50.0ms

Adjusts the time needed for the effect

sound to be output after the direct sound

has been output.

E.LEVEL (Effect Level) *1

0 – 100

Adjusts the volume of the effect sound.

DLY TME (Delay Time) *2

10 – 1000ms

This parameter adjusts the delay time (i.e.,

the interval for which sound is delayed).

FEEDBACK *2

0 – 100

This parameter adjusts the amount of feed-

back. Changing the amount of feedback

causes the number of time the delayed

sound is repeated to change as well.

E.LEVEL (Effect Level) *2

0 – 100

This adjusts the volume of the delay sound.

REV SEND (Reverb SEND) *2

0 – 100

Adjust the volume of the reverb that is ap-

plied to the delayed sound.

Parameter/

Range

Explanation

BR800_e.book 85 ページ２０１１年６月６日　月曜日　午後２時１４分

1 2 ... 80 81 82 83 84 85 86 87 88 89 90 ... 167 168

Kommentare zu diesen Handbüchern

Keine Kommentare