Roland SJ-740 Bedienungsanleitung PDF herunterladen (Seite 87)

5-5 Optimizing Printing to Match Media Thickness

Chapter 5 Feature Reference

Performing Feed Correction to Alleviate Horizontal Bands and the Like

Procedure

Print a test pattern.

➊

Press .

Press

several times.

➋

Press .

Press

to start printing.

Read the correction values from the test pattern.

In the printing example shown below, "-0.40" becomes the correction value.

Enter the correction values that you read.

Press .

Press

Use

to make the setting for the correction value.

Press

to enable the setting.

Go back to the original screen.

Press .

Press

to go back to the original screen.

Description

The movement transfer of media experiences subtle changes due to the thickness of the media and the temperature of

the media heating system. When the movement distance becomes discrepant, horizontal stripes are more likely to

occur during printing. We recommend performing correction to match the media you're using and the media heating

system. Also, perform the actual printing in an operating environment identical to that used for the test pattern.

CALIBRATION

TEST PRINT

SETTING

- 0.40%0.00%

Gap present Overlap

Choose the one that has

the smallest gap and the

least amount of overlap.

Test pattern

W 1839mm

Current correction value

1 2 ... 82 83 84 85 86 87 88 89 90 91 92 ... 127 128

Keine Kommentare

Roland SJ-740 Bedienungsanleitung Seite 87