Roland CJ-540 Bedienungsanleitung PDF herunterladen (Seite 43)

Chapter 2 - Basic Operation

2-3 Loading Media

Align the left- and right-hand stoppers with the

width of the media and tighten the screws to

secure in place.

Pull out the media so that at least 50 cm (20

in.) hangs down at the front of the machine.

Rotate the media flanges on the shaft to take

up the hanging media at the front of the ma-

chine.

To ensure that the media take-up is not crooked,

clear of items such as the media clamps that

may obstruct media feed.

With the media pulled out from the roll stretched taut with no slack, move the sheet loading lever

toward "LOAD".

Pinch rollers lower to hold the media in place.

To secure the media in place,

move all the way to "LOAD".

When moved partway, only the

left-hand pinch roller descends.

Data cannot be output while in this

state.

If there is slackness in the loaded media,

the media may move at an angle and come

loose from the pinch rollers.

Screw

Stopper

Media flange

Shafts

Continued on the next page

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 123 124

Keine Kommentare

Roland CJ-540 Bedienungsanleitung Seite 43