Roland TD-10 Bedienungsanleitung PDF herunterladen (Seite 31)

● Adjusting the head tension

For these pads, adjustments are required in order to regularize the tension of the head. Also, the ten-

sion of the head may change when the pad has been used for a long period. If this occurs, use the

following procedure to make adjustments as necessary.

fig.00-025

Make sure that the Trigger Type (pad model name) is set either to “10A” (PD-100) or to “12A” (PD-

120).

Press [SETUP], then press [F1 (TRIG)], and then press [F4 (OPTION)].

Strike the PD-100 or PD-120 for which you wish to make settings.

The setting page for the pad that you struck will appear.

fig.00-026

Use [CURSOR] to move the cursor to “Head Tension Adjustment.”

Use [INC/DEC] or the VALUE dial to make the setting.

With a setting of “Loose” it will be adjusted at a weaker tension, and with a setting of “Tight” it will

be adjusted at a stronger tension.

For now, set this to the medium value of “Normal.”

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 181 182

Keine Kommentare

Roland TD-10 Bedienungsanleitung Seite 31