Roland MV-8800 Bedienungsanleitung Seite 1

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Musikinstrumente Roland MV-8800 herunter. Roland MV-8800 TurboStart Benutzerhandbuch

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 2
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 0
©2007 Roland Corporation U.S. www.RolandUS.com TBS254
®ÂØÒňÎ
®
MV-8800 Production STUDIO
1
Welcome
Congratulations on your purchase of the Roland MV-8800. This TurboStart contains step-
by-step instructions that will quickly introduce you to the MV-8800’s major features.
Creating a New Project
Press PROJECT.1
Use the CURSOR buttons to select CREATE NEW PROJ, and then press ENTER.2
Press F5 (Execute).3
If you’d like to save changes made to the current project— press F5 (Yes).
If you’d like to create the new project without saving—
press F1 (No).
Loading a Patch
Press INSTRUMENTS.1
Press MENU, select Load Patch, and then press ENTER.2
If a hard drive doesn’t appear in the upper left-hand corner of the display, press F1 3
(Select Drive), select Hard Drive, and then press F5 (Select).
Turn the VALUE dial to select the PATCHES folder, and press ENTER to open it.
4
Note: You can press the CURSOR button to back out of the folder.
Turn the VALUE dial to select the DRUMKITS folder, and then press ENTER.
5
Turn the VALUE dial to select any drum kit, and then press F5 (Load)—to open the 6
ASSIGN TO PART/LIBRARY window.
Turn the VALUE dial to select Part 1, and then press F5 (Execute).
7
After the patch has finished loading, press INSTRUMENTS—you see the patch 8
loaded into Part 1.
Play the VELOCITY PADS to hear the drum kit.
9
Assigning a Patch to a MIDI Track
Press PATTERN, and then press the 1 CURSOR to select the first MIDI track.
Press F2 (Track Param) to open the TRACK PARAMETER window.
2
In the Output Assign field, select Part 1, which is your drum kit.3
Making a Beat
Press PATTERN.1
Select your MIDI track, and then press REC to open the PATTERN RECORDING 2
PARAMETER window. The MV-8800’s click (metronome) sounds.
Set
3
Record Mode— to OverDub1.
Count In to
1Meas.
Pattern Length—
to 2Meas.
Input Quantize Type—
to Grid.
Practice your beat by playing along with the click.
4
When you’re ready to record your beat, press PLAY. On the fifth click, start playing 5
the VELOCITY PADS for two measures. At the end of the Measure 2, your beat loops
around and you hear what you’ve recorded.
Tip: You can put the MV-8800 into Rehearsal mode by pressing the REC button without
pressing STOP first. This allows you to try out extra drum parts without recording them.
Press REC a second time to return the MV-8800 to Record mode.
When you’re finished, press STOP.
6
Sampling from an External Source
Connect the left and right line outputs of a CD player, DJ mixer, DVD player, or synth 1
to the MIC/LINE inputs of the MV-8800.
Press SAMPLING, and then set
2
Sample Type— to Stereo.
Input Select—
to Analog.
Start Trigger—
to Manual.
Stop Trigger—
to Manual.
While playing the external source, watch the meters on the left side of the display,
3
and adjust the SENS L/R knobs to ensure a good level.
At the point where you’d like to begin sampling, press F5 (Start).
4
At the point where youd like to stop sampling, press F5 (Stop)—the RESULTS 5
window opens and displays the waveform of your new sample.
Seitenansicht 0
1 2

Inhaltsverzeichnis

Seite 1 - Production STUDIO

©2007 Roland Corporation U.S. www.RolandUS.com TBS254®ÂØÒňήMV-8800 Production STUDIO1WelcomeCongratulations on your purchase of the Roland MV-8800

Seite 2

©2007 Roland Corporation U.S. www.RolandUS.com TBS254®ÂØÒňήMV-8800 Production STUDIO2Assigning Your Sample to a PadFollow the instructions in the

Kommentare zu diesen Handbüchern

Keine Kommentare