R
®
System Version Procedures
©2008 Roland Corporation U.S. Page
Sonic Cell Power on while holding SMF/AUDIO PLAYER, EFFECTS, and EXIT
SP-700 Power on
SP-303 Power on while holding FILTER+DRIVE, PITCH and DELAY
SP-404 Power on while holding MARK
SP-505 Power on while holding EXIT and ENTER
SP-606 With the power on, press MENU. Press ENTER. Press and hold FUNCTION and F1. When
the System Info menu shows in the display, release FUNCTION and F1, and then press F2
SP-808 Version is displayed on power-up
SPD-S Power on while holding ALL SOUND OFF and CARD
SPD-11/20 Power on while holding SELECT and EDIT
SRC-2 Power on while holding PEAK HOLD RESET. (To read version number, DIGITAL STEREO
IN A LED’s represent first digit, DIGITAL STEREO B LED’s represent second digit and
DIGITAL MIX OUT LED’s represent third digit)
SRV-330 Power on
SRV-3030 Power on while holding CATEGORY, UNIT A/B and SYSTEM
SX-700 Power on while holding MOD and RSS
T
Model Procedure
TD-5 Power on while holding PATCH LEFT (<) and INSTRUMENT RIGHT (>)
TD-6/6V Power on while holding KIT, the LEFT ARROW button and ENTER simultaneously
TD-7 Power on while holding SYSTEM and EDIT
TD-8 Power on while holding F1, F2 and F3, then press CLICK, followed by RIM
TD-9
With the power on, press SETUP. Hold SHIFT and press EXIT. Release SHIFT and
EXIT, and press CURSOR Left and then CURSOR down.
TD-10 Power on while holding the DOWN CURSOR button. The version is displayed in the center
of the screen
TD-12 Power on while holding the MIXER, AMBIENCE, and KIT buttons. When the display shows
the DRUM KIT menu, release the buttons, and then press SETUP, then F3, followed by
F5.
The version number will show next to the word "FLASH" in the display
TD-20 With the TD-20’s power on, press TOOLS and then press F2[INFO]
TMC-6 Set the TRIG/HH CTRL switch on the rear panel to TRIG 6. Set the PARAMETER knob to
XTALK CANCEL. Power on the unit while holding the INC and DEC buttons simultaneously
U
Model Procedure
U-20 In the PLAY MODE section, press PART and RHYTHM simultaneously, to enter ROM PLAY.
While holding MARK and JUMP, press ENTER
U-110 Power on while holding DEC and INC
U-220 Press DATA. Use the LEFT (<) and RIGHT (>) cursor buttons to select UTIL. Press
ENTER. Use the LEFT (<) and RIGHT (>) cursor buttons to select ROM PLAY. Press
ENTER. While holding MARK and JUMP, press ENTER
V
Model Procedure
V-Synth Power on while holding –OCT, +OCT , and the 8 button
V-SynthGT Press the SYSTEM button, then touch INFO on the touchscreen.
V-SynthXT Power on while holding PREVIEW and BANK
VariOS Without a PC card inserted, turn on the power. When “Part1 NO WAVE DATA” is
displayed, hold EXIT and press VALUE
VA-5/7
Power on while holding PIANO, ONE TOUCH and INTRO. Then press the BANK 1
(228 Seiten)
(64 Seiten)
(224 Seiten)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern