Roland V-4 Bedienungshandbuch PDF herunterladen (Seite 21)

Checking the inputs and outputs

3. Switch the output channel

Try switching the channel that is being output to the V-4’s preview monitor. Press the preview

select buttons (1 through 4 and OUTPUT) one after another, and verify that the image being output

to your TV monitor changes accordingly.

About the display on preview monitor

Information about settings of V-4 is displayed to the Preview Monitor as below.

• If name of the effect is highlighted, this is the effect selected

• If * mark is displayed after effect name, the effect parameter can be changed with the control dial.

• If ball mark is displayed aside highlighted effect names, it means the effect parameter can be changed

with the control dial.

You can add or reduce the information displayed on the preview monitor by changing the settings

of the V-4 as described on P. 75 or later.

• [**Preset**] is displayed when position 1 of Memory Dial is selected. The 1st setting is fixed to the

factory preset and cannot be changed.

• [*Protect On*] is displayed when Memory Protection is enabled. If this message appears, settings

cannot be changed.

Selection of preview output

Current position and

setting of Output Fader

Settings of

channel B effects

Channel selection

of video fader and

input selection

Settings of

BPM and TAP

Settings of

channel A effects

Selection of

Transition Effect

Setting of

Transformers

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 99 100

Keine Kommentare

Roland V-4 Bedienungshandbuch Seite 21