Roland AC-3 Bedienungshandbuch PDF herunterladen (Seite 8)

Connections

* Raise the amp volume only after turning on the

power to all connected devices.

* The use of an AC adaptor is recommended as the

unit’s power consumption is relatively high.

Should you prefer to use batteries, please use the

alkaline type.

* To prevent malfunction and/or damage to

speakers or other devices, always turn down the

volume, and turn off the power on all devices

before making any connections.

* If there are batteries in the unit while an AC

adaptor is being used, normal operation will

continue should the line voltage be interrupted

(power blackout or power cord disconnection).

* Once the connections have been completed, turn

on power to your various devices in the order

specified. By turning on devices in the wrong

order, you risk causing malfunction and/or

damage to speakers and other devices.

When powering up:

Turn on the power to your guitar amp last.

When powering down:

Turn off the power to your guitar amp first.

* Always make sure to have the volume level

turned down before switching on power. Even

with the volume all the way down, you may still

hear some sound when the power is switched on,

but this is normal, and does not indicate a

malfunction.

* When operating on battery power only, the

CHECK indicator will become dim when battery

power gets too low. Replace the battery as soon

as possible.

NOTE (Placement)

Depending on the material and temperature of the surface on which you place the unit, its bottom cover (rubber) may

discolor or mar the surface. You can place a piece of felt or cloth under the bottom cover to prevent this from happening.

If you do so, please make sure that the unit will not slip or move accidentally.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 23 24

Keine Kommentare

Roland AC-3 Bedienungshandbuch Seite 8